Move PHYLIB to Kconfig

[platform/kernel/u-boot.git] / include / configs / am335x_igep003x.h

diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h
index cf47fcf..3d3d5e7 100644 (file)
--- a/include/configs/am335x_igep003x.h
+++ b/include/configs/am335x_igep003x.h
@@ -21,7 +21,7 @@
 #define V_OSCK                         24000000  /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK)
 
-#define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
+#define CONFIG_ENV_SIZE                        (96 << 10)      /*  96 KiB */
 
 /* Make the verbose messages from UBI stop printing */
 #define CONFIG_UBI_SILENCE_MSG
@@ -34,7 +34,6 @@
        DEFAULT_LINUX_BOOT_ENV \
        "bootdir=/boot\0" \
        "bootfile=zImage\0" \
-       "dtbfile=am335x-base0033.dtb\0" \
        "console=ttyO0,115200n8\0" \
        "mmcdev=0\0" \
        "mmcroot=/dev/mmcblk0p2 rw\0" \
@@ -48,7 +47,7 @@
        "importbootenv=echo Importing environment from mmc ...; " \
                "env import -t ${loadaddr} ${filesize}\0" \
        "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \
-               "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${dtbfile}\0" \
+               "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \
        "mmcboot=mmc dev ${mmcdev}; " \
                "if mmc rescan; then " \
                        "echo SD/MMC found on device ${mmcdev};" \
@@ -67,11 +66,11 @@
                "fi;\0" \
        "mtdids=" MTDIDS_DEFAULT "\0" \
        "mtdparts=" MTDPARTS_DEFAULT "\0" \
-       "nandroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \
+       "nandroot=ubi0:rootfs rw ubi.mtd=1\0" \
        "nandrootfstype=ubifs rootwait\0" \
-       "nandload=ubi part filesystem 2048; ubifsmount ubi0; " \
-               "ubifsload ${loadaddr} ${bootdir}/${bootfile}; " \
-               "ubifsload ${fdtaddr} ${bootdir}/${dtbfile} \0" \
+       "nandload=ubi part UBI; " \
+               "ubi read ${loadaddr} kernel; " \
+               "ubi read ${fdtaddr} dtb \0" \
        "nandargs=setenv bootargs console=${console} " \
                "${optargs} " \
                "root=${nandroot} " \
@@ -79,44 +78,74 @@
        "nandboot=echo Booting from nand ...; " \
                "run nandargs; " \
                "run nandload; " \
-               "bootz ${loadaddr} - ${fdtaddr} \0"
+               "bootz ${loadaddr} - ${fdtaddr} \0" \
+       "netload=tftpboot ${loadaddr} ${bootfile}; " \
+               "tftpboot ${fdtaddr} ${fdtfile} \0" \
+       "netargs=setenv bootargs console=${console} " \
+               "${optargs} " \
+               "root=/dev/nfs " \
+               "ip=${ipaddr} nfsroot=${serverip}:${rootnfs},v3,tcp \0" \
+       "netboot=echo Booting from net ...; " \
+               "run netargs; " \
+               "run netload; " \
+               "bootz ${loadaddr} - ${fdtaddr} \0" \
+       "findfdt="\
+               "if test ${board_name} = igep0033; then " \
+                       "setenv fdtfile am335x-igep-base0033.dtb; fi; " \
+               "if test ${board_name} = igep0034; then " \
+                       "setenv fdtfile am335x-igep-base0040.dtb; fi; " \
+               "if test ${board_name} = igep0034-lite; then " \
+                       "setenv fdtfile am335x-igep-base0040-lite.dtb; fi; " \
+               "if test ${fdtfile} = ''; then " \
+                       "echo WARNING: Could not determine device tree to use; fi; \0"
 #endif
 
 #define CONFIG_BOOTCOMMAND \
+       "run findfdt;" \
        "run mmcboot;" \
-       "run nandboot;"
+       "run nandboot;" \
+       "run netboot;"
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_COM1                0x44e09000      /* UART0 */
 #define CONFIG_CONS_INDEX              1
 
 /* Ethernet support */
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC
 
 /* NAND support */
 #define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_ONFI_DETECTION 1
-#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              0x180000 /* environment starts here */
-#define CONFIG_ENV_ADDR_REDUND         (CONFIG_ENV_OFFSET + CONFIG_SYS_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND         (CONFIG_ENV_SIZE)
 
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
 
 #define MTDIDS_DEFAULT                 "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT               "mtdparts=omap2-nand.0:512k(spl),"\
-                                       "1m(uboot),256k(environment),"\
-                                       "-(filesystem)"
+#define MTDPARTS_DEFAULT               "mtdparts=omap2-nand.0:512k(SPL),-(UBI)"
 
 /* SPL */
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
-
+#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/u-boot-spl.lds"
+
+/* UBI configuration */
+#define CONFIG_SPL_UBI                 1
+#define CONFIG_SPL_UBI_MAX_VOL_LEBS    256
+#define CONFIG_SPL_UBI_MAX_PEB_SIZE    (256*1024)
+#define CONFIG_SPL_UBI_MAX_PEBS                4096
+#define CONFIG_SPL_UBI_VOL_IDS         8
+#define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
+#define CONFIG_SPL_UBI_LOAD_KERNEL_ID  3
+#define CONFIG_SPL_UBI_LOAD_ARGS_ID    4
+#define CONFIG_SPL_UBI_PEB_OFFSET      4
+#define CONFIG_SPL_UBI_VID_OFFSET      512
+#define CONFIG_SPL_UBI_LEB_START       2048
+#define CONFIG_SPL_UBI_INFO_ADDR       0x88080000
+
+/* environment organization */
+#define CONFIG_ENV_UBI_PART            "UBI"
+#define CONFIG_ENV_UBI_VOLUME          "config"
+#define CONFIG_ENV_UBI_VOLUME_REDUND   "config_r"
+
+/* NAND config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
                                         CONFIG_SYS_NAND_PAGE_SIZE)
@@ -136,8 +165,4 @@
 #define CONFIG_SYS_NAND_ECCBYTES       14
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
 
-#define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
-
 #endif /* ! __CONFIG_IGEP003X_H */