imx8mm_evk: Increase CONFIG_SYS_BOOTM_LEN to 64MB

[platform/kernel/u-boot.git] / include / configs / am335x_igep003x.h

diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h
index cf47fcf..339a975 100644 (file)
--- a/include/configs/am335x_igep003x.h
+++ b/include/configs/am335x_igep003x.h
@@ -14,27 +14,17 @@
 #ifndef __CONFIG_IGEP003X_H
 #define __CONFIG_IGEP003X_H
 
-#define CONFIG_NAND
 #include <configs/ti_am335x_common.h>
 
 /* Clock defines */
 #define V_OSCK                         24000000  /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK)
 
-#define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
-
-/* Make the verbose messages from UBI stop printing */
-#define CONFIG_UBI_SILENCE_MSG
-#define CONFIG_UBIFS_SILENCE_MSG
-
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
        DEFAULT_LINUX_BOOT_ENV \
        "bootdir=/boot\0" \
        "bootfile=zImage\0" \
-       "dtbfile=am335x-base0033.dtb\0" \
        "console=ttyO0,115200n8\0" \
        "mmcdev=0\0" \
        "mmcroot=/dev/mmcblk0p2 rw\0" \
@@ -48,7 +38,7 @@
        "importbootenv=echo Importing environment from mmc ...; " \
                "env import -t ${loadaddr} ${filesize}\0" \
        "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \
-               "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${dtbfile}\0" \
+               "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \
        "mmcboot=mmc dev ${mmcdev}; " \
                "if mmc rescan; then " \
                        "echo SD/MMC found on device ${mmcdev};" \
@@ -65,13 +55,13 @@
                                "bootz ${loadaddr} - ${fdtaddr};" \
                        "fi;" \
                "fi;\0" \
-       "mtdids=" MTDIDS_DEFAULT "\0" \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
-       "nandroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+       "nandroot=ubi0:rootfs rw ubi.mtd=1\0" \
        "nandrootfstype=ubifs rootwait\0" \
-       "nandload=ubi part filesystem 2048; ubifsmount ubi0; " \
-               "ubifsload ${loadaddr} ${bootdir}/${bootfile}; " \
-               "ubifsload ${fdtaddr} ${bootdir}/${dtbfile} \0" \
+       "nandload=ubi part UBI; " \
+               "ubi read ${loadaddr} kernel; " \
+               "ubi read ${fdtaddr} dtb \0" \
        "nandargs=setenv bootargs console=${console} " \
                "${optargs} " \
                "root=${nandroot} " \
@@ -79,51 +69,42 @@
        "nandboot=echo Booting from nand ...; " \
                "run nandargs; " \
                "run nandload; " \
-               "bootz ${loadaddr} - ${fdtaddr} \0"
+               "bootz ${loadaddr} - ${fdtaddr} \0" \
+       "netload=tftpboot ${loadaddr} ${bootfile}; " \
+               "tftpboot ${fdtaddr} ${fdtfile} \0" \
+       "netargs=setenv bootargs console=${console} " \
+               "${optargs} " \
+               "root=/dev/nfs " \
+               "ip=${ipaddr} nfsroot=${serverip}:${rootnfs},v3,tcp \0" \
+       "netboot=echo Booting from net ...; " \
+               "run netargs; " \
+               "run netload; " \
+               "bootz ${loadaddr} - ${fdtaddr} \0" \
+       "findfdt="\
+               "if test ${board_name} = igep0033; then " \
+                       "setenv fdtfile am335x-igep-base0033.dtb; fi; " \
+               "if test ${board_name} = igep0034; then " \
+                       "setenv fdtfile am335x-igep-base0040.dtb; fi; " \
+               "if test ${board_name} = igep0034-lite; then " \
+                       "setenv fdtfile am335x-igep-base0040-lite.dtb; fi; " \
+               "if test ${fdtfile} = ''; then " \
+                       "echo WARNING: Could not determine device tree to use; fi; \0"
 #endif
 
 #define CONFIG_BOOTCOMMAND \
+       "run findfdt;" \
        "run mmcboot;" \
-       "run nandboot;"
+       "run nandboot;" \
+       "run netboot;"
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_COM1                0x44e09000      /* UART0 */
-#define CONFIG_CONS_INDEX              1
 
 /* Ethernet support */
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_SMSC
 
 /* NAND support */
-#define CONFIG_NAND_OMAP_ELM
-#define CONFIG_SYS_NAND_ONFI_DETECTION 1
-#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              0x180000 /* environment starts here */
-#define CONFIG_ENV_ADDR_REDUND         (CONFIG_ENV_OFFSET + CONFIG_SYS_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND         (CONFIG_ENV_SIZE)
-
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
 
-#define MTDIDS_DEFAULT                 "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT               "mtdparts=omap2-nand.0:512k(spl),"\
-                                       "1m(uboot),256k(environment),"\
-                                       "-(filesystem)"
-
-/* SPL */
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
-
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
+/* NAND config */
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \
@@ -134,10 +115,5 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       14
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
-
-#define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
 
 #endif /* ! __CONFIG_IGEP003X_H */