#define __CONFIG_AM335X_EVM_H
#include <configs/ti_am335x_common.h>
-#include <environment/ti/dfu.h>
#ifndef CONFIG_SPL_BUILD
# define CONFIG_TIMESTAMP
#define CONFIG_SYS_BOOTM_LEN (16 << 20)
-#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
-#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
-#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
/* Always 128 KiB env size */
#define CONFIG_ENV_SIZE (128 << 10)
-/* Enhance our eMMC support / experience. */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
-
#ifdef CONFIG_NAND
#define NANDARGS \
"mtdids=" MTDIDS_DEFAULT "\0" \
#include <config_distro_bootcmd.h>
#ifndef CONFIG_SPL_BUILD
+#include <environment/ti/dfu.h>
+#include <environment/ti/mmc.h>
+
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
"setenv fdtfile am335x-bone.dtb; fi; " \
"if test $board_name = A335BNLT; then " \
"setenv fdtfile am335x-boneblack.dtb; fi; " \
+ "if test $board_name = BBBW; then " \
+ "setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \
"if test $board_name = BBG1; then " \
"setenv fdtfile am335x-bonegreen.dtb; fi; " \
+ "if test $board_name = BBGW; then " \
+ "setenv fdtfile am335x-bonegreen-wireless.dtb; fi; " \
+ "if test $board_name = BBBL; then " \
+ "setenv fdtfile am335x-boneblue.dtb; fi; " \
"if test $board_name = A33515BB; then " \
"setenv fdtfile am335x-evm.dtb; fi; " \
"if test $board_name = A335X_SK; then " \
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
* and DFU.
*/
#define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_AM335X_USB0
#endif
#ifdef CONFIG_USB_MUSB_GADGET
-/* Removing USB gadget and can be enabled adter adding support usb DM */
-#ifndef CONFIG_DM_ETH
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
-#endif /* CONFIG_DM_ETH */
#endif /* CONFIG_USB_MUSB_GADGET */
/*
#ifdef CONFIG_SPL_BUILD
#undef CONFIG_DM_MMC
#undef CONFIG_TIMER
+#undef CONFIG_DM_USB
#endif
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
#undef CONFIG_ENV_IS_IN_NAND
/* disable host part of MUSB in SPL */
/* disable EFI partitions and partition UUID support */
-#undef CONFIG_PARTITION_UUIDS
-#undef CONFIG_EFI_PARTITION
#endif
/* USB Device Firmware Update support */
#define CONFIG_ENV_OFFSET 0x0
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_SYS_MMC_MAX_DEVICE 2
#elif defined(CONFIG_NOR_BOOT)
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
* 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
*/
#if defined(CONFIG_NOR)
-#undef CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_FLASH_CFI