#ifndef __CONFIG_AM335X_EVM_H
#define __CONFIG_AM335X_EVM_H
-#define CONFIG_AM33XX
+#include <configs/ti_am335x_common.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-
-#define CONFIG_DMA_COHERENT
-#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
-
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT "U-Boot# "
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_SYS_NO_FLASH
#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
+/* Clock Defines */
+#define V_OSCK 24000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK)
-/* commands to include */
-#include <config_cmd_default.h>
+/* Custom script for NOR */
+#define CONFIG_SYS_LDSCRIPT "board/ti/am335x/u-boot.lds"
-#define CONFIG_CMD_ASKENV
-#define CONFIG_VERSION_VARIABLE
+/* Always 128 KiB env size */
+#define CONFIG_ENV_SIZE (128 << 10)
+
+#ifdef CONFIG_NAND
+#define NANDARGS \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "nandargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype}\0" \
+ "dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \
+ "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
+ "nandrootfstype=ubifs rootwait=1\0" \
+ "nandsrcaddr=0x280000\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
+ "bootz ${loadaddr}\0" \
+ "nandimgsize=0x500000\0"
+#else
+#define NANDARGS ""
+#endif
-/* set to negative value for no autoboot */
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
"fdtaddr=0x80F80000\0" \
"fdt_high=0xffffffff\0" \
+ "boot_fdt=try\0" \
"rdaddr=0x81000000\0" \
- "bootfile=/boot/uImage\0" \
- "fdtfile=\0" \
+ "bootpart=0:2\0" \
+ "bootdir=/boot\0" \
+ "bootfile=zImage\0" \
+ "fdtfile=undefined\0" \
"console=ttyO0,115200n8\0" \
"optargs=\0" \
+ "dfu_alt_info_mmc=" DFU_ALT_INFO_MMC "\0" \
+ "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 ro\0" \
"mmcrootfstype=ext4 rootwait\0" \
- "bootpart=0:2\0" \
- "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
- "nandrootfstype=ubifs rootwait=1\0" \
- "nandsrcaddr=0x280000\0" \
- "nandimgsize=0x500000\0" \
"rootpath=/export/rootfs\0" \
"nfsopts=nolock\0" \
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
"${optargs} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
- "nandargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=${nandroot} " \
- "rootfstype=${nandrootfstype}\0" \
"spiroot=/dev/mtdblock4 rw\0" \
"spirootfstype=jffs2\0" \
"spisrcaddr=0xe0000\0" \
"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
"env import -t $loadaddr $filesize\0" \
+ "dfu_alt_info_ram=" DFU_ALT_INFO_RAM "\0" \
"ramargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
- "loaduimage=load mmc ${bootpart} ${loadaddr} ${bootfile}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr}\0" \
- "nandboot=echo Booting from nand ...; " \
- "run nandargs; " \
- "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
- "bootm ${loadaddr}\0" \
+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ "mmcloados=run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootz ${loadaddr} - ${fdtaddr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0" \
+ "mmcboot=mmc dev ${mmcdev}; " \
+ "if mmc rescan; then " \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "if run loadbootenv; then " \
+ "echo Loaded environment from ${bootenv};" \
+ "run importbootenv;" \
+ "fi;" \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "if run loadimage; then " \
+ "run mmcloados;" \
+ "fi;" \
+ "fi;\0" \
"spiboot=echo Booting from spi ...; " \
"run spiargs; " \
"sf probe ${spibusno}:0; " \
"sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
- "bootm ${loadaddr}\0" \
+ "bootz ${loadaddr}\0" \
"netboot=echo Booting from network ...; " \
"setenv autoload no; " \
"dhcp; " \
"tftp ${loadaddr} ${bootfile}; " \
+ "tftp ${fdtaddr} ${fdtfile}; " \
"run netargs; " \
- "bootm ${loadaddr}\0" \
+ "bootz ${loadaddr} - ${fdtaddr}\0" \
"ramboot=echo Booting from ramdisk ...; " \
"run ramargs; " \
- "bootm ${loadaddr}\0" \
+ "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
"findfdt="\
"if test $board_name = A335BONE; then " \
"setenv fdtfile am335x-bone.dtb; fi; " \
"if test $board_name = A33515BB; then " \
"setenv fdtfile am335x-evm.dtb; fi; " \
"if test $board_name = A335X_SK; then " \
- "setenv fdtfile am335x-evmsk.dtb; fi\0" \
-
+ "setenv fdtfile am335x-evmsk.dtb; fi; " \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine device tree to use; fi; \0" \
+ NANDARGS
#endif
#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
- "if run loadbootenv; then " \
- "echo Loaded environment from ${bootenv};" \
- "run importbootenv;" \
- "fi;" \
- "if test -n $uenvcmd; then " \
- "echo Running uenvcmd ...;" \
- "run uenvcmd;" \
- "fi;" \
- "if run loaduimage; then " \
- "run mmcboot;" \
- "fi;" \
- "else " \
- "run nandboot;" \
- "fi;" \
-
-/* Clock Defines */
-#define V_OSCK 24000000 /* Clock output from T2 */
-#define V_SCLK (V_OSCK)
-
-#define CONFIG_CMD_ECHO
-
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 512
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
- + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/*
- * memtest works on 8 MB in DRAM after skipping 32MB from
- * start addr of ram disk
- */
-#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024))
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
- + (8 * 1024 * 1024))
-
-#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
-#define CONFIG_SYS_HZ 1000 /* 1ms clock */
-
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FS_GENERIC
-
-#define CONFIG_SPI
-#define CONFIG_OMAP3_SPI
-#define CONFIG_MTD_DEVICE
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_SPEED (24000000)
-
- /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
-#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
-#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
- GENERATED_GBL_DATA_SIZE)
- /* Platform/Board specific defs */
-#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
+ "run findfdt; " \
+ "run mmcboot;" \
+ "setenv mmcdev 1; " \
+ "setenv bootpart 1:2; " \
+ "run mmcboot;" \
+ "run nandboot;"
/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SERIAL_MULTI
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
+#define CONFIG_BAUDRATE 115200
/* I2C Configuration */
-#define CONFIG_I2C
-#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP24XX_I2C
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_OMAP_GPIO
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
-4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
-
-#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
+/* PMIC support */
+#define CONFIG_POWER_TPS65217
+#define CONFIG_POWER_TPS65910
-#define CONFIG_ENV_IS_NOWHERE
+/* SPL */
+#ifndef CONFIG_NOR_BOOT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_YMODEM_SUPPORT
-/* Defines for SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE 0x402F0400
-#define CONFIG_SPL_MAX_SIZE (101 * 1024)
-#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+/* Bootcount using the RTC block */
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_BOOTCOUNT_AM33XX
-#define CONFIG_SPL_BSS_START_ADDR 0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+/* CPSW support */
+#define CONFIG_SPL_ETH_SUPPORT
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+/* USB gadget RNDIS */
+#define CONFIG_SPL_MUSB_NEW_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_YMODEM_SUPPORT
+/* General network SPL, both CPSW and USB gadget RNDIS */
#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
-#define CONFIG_SPL_ETH_SUPPORT
+
+/* SPI flash. */
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SPL_SPI_BUS 0
#define CONFIG_SPL_SPI_CS 0
-#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x80000
-#define CONFIG_SPL_MUSB_NEW_SUPPORT
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
+
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NAND_AM33XX_BCH
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
+#ifdef CONFIG_NAND
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_SYS_NAND_ECCSTEPS 4
-#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
- CONFIG_SYS_NAND_ECCSTEPS)
-
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+#endif
+#endif
/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
- * other needs.
- */
-#define CONFIG_SYS_TEXT_BASE 0x80800000
-#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-
-/* Since SPL did pll and ddr initialization for us,
- * we don't need to do it twice.
+ * For NOR boot, we must set this to the start of where NOR is mapped
+ * in memory.
*/
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
+#ifdef CONFIG_NOR_BOOT
+#define CONFIG_SYS_TEXT_BASE 0x08000000
#endif
/*
- * USB configuration
+ * USB configuration. We enable MUSB support, both for host and for
+ * gadget. We set USB0 as peripheral and USB1 as host, based on the
+ * board schematic and physical port wired to each. Then for host we
+ * add mass storage support and for gadget we add both RNDIS ethernet
+ * and DFU.
*/
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_MUSB_GADGET
#define CONFIG_MUSB_PIO_ONLY
+#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
+#define CONFIG_USB_GADGET
+#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_MUSB_HOST
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
+
+/* USB TI's IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x0403
+#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
+#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
#endif /* CONFIG_MUSB_GADGET */
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
#undef CONFIG_SPL_ETH_SUPPORT
#endif
+/* USB Device Firmware Update support */
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_MMC
+#define CONFIG_CMD_DFU
+#define DFU_ALT_INFO_MMC \
+ "boot part 0 1;" \
+ "rootfs part 0 2;" \
+ "MLO fat 0 1;" \
+ "MLO.raw mmc 100 100;" \
+ "u-boot.img.raw mmc 300 400;" \
+ "spl-os-args.raw mmc 80 80;" \
+ "spl-os-image.raw mmc 900 2000;" \
+ "spl-os-args fat 0 1;" \
+ "spl-os-image fat 0 1;" \
+ "u-boot.img fat 0 1;" \
+ "uEnv.txt fat 0 1"
+#ifdef CONFIG_NAND
+#define CONFIG_DFU_NAND
+#define DFU_ALT_INFO_NAND \
+ "SPL part 0 1;" \
+ "SPL.backup1 part 0 2;" \
+ "SPL.backup2 part 0 3;" \
+ "SPL.backup3 part 0 4;" \
+ "u-boot part 0 5;" \
+ "u-boot-spl-os part 0 6;" \
+ "kernel part 0 8;" \
+ "rootfs part 0 9"
+#endif
+#define CONFIG_DFU_RAM
+#define DFU_ALT_INFO_RAM \
+ "kernel ram 0x80200000 0xD80000;" \
+ "fdt ram 0x80F80000 0x80000;" \
+ "ramdisk ram 0x81000000 0x4000000"
+
/*
- * Default to using SPI for environment, etc. We have multiple copies
- * of SPL as the ROM will check these locations.
- * 0x0 - 0x20000 : First copy of SPL
- * 0x20000 - 0x40000 : Second copy of SPL
- * 0x40000 - 0x60000 : Third copy of SPL
- * 0x60000 - 0x80000 : Fourth copy of SPL
- * 0x80000 - 0xDF000 : U-Boot
- * 0xDF000 - 0xE0000 : U-Boot Environment
- * 0xE0000 - 0x442000 : Linux Kernel
+ * Default to using SPI for environment, etc.
+ * 0x000000 - 0x020000 : SPL (128KiB)
+ * 0x020000 - 0x0A0000 : U-Boot (512KiB)
+ * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB)
+ * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB)
+ * 0x0E0000 - 0x442000 : Linux Kernel
* 0x442000 - 0x800000 : Userland
*/
#if defined(CONFIG_SPI_BOOT)
-# undef CONFIG_ENV_IS_NOWHERE
-# define CONFIG_ENV_IS_IN_SPI_FLASH
-# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
-# define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */
-# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
-#endif /* SPI support */
-
-/* Unsupported features */
-#undef CONFIG_USE_IRQ
-
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_DRIVER_TI_CPSW
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
+#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
+#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
+#define MTDIDS_DEFAULT "nor0=m25p80-flash.0"
+#define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \
+ "512k(u-boot),128k(u-boot-env1)," \
+ "128k(u-boot-env2),3464k(kernel)," \
+ "-(rootfs)"
+#elif defined(CONFIG_EMMC_BOOT)
+#undef CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 1
+#define CONFIG_SYS_MMC_ENV_PART 2
+#define CONFIG_ENV_OFFSET 0x0
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#endif
+
+/* SPI flash. */
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+
+/* Network. */
#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB
#define CONFIG_PHY_ADDR 0
#define CONFIG_PHY_SMSC
-#define CONFIG_NAND
/* NAND support */
#ifdef CONFIG_NAND
#define CONFIG_CMD_NAND
-#define CONFIG_NAND_OMAP_GPMC
#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
-#define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */
- /* to access nand at */
- /* CS0 */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND
- devices */
-#if !defined(CONFIG_SPI_BOOT)
-#undef CONFIG_ENV_IS_NOWHERE
+#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
+#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
+ "128k(SPL.backup1)," \
+ "128k(SPL.backup2)," \
+ "128k(SPL.backup3),1792k(u-boot)," \
+ "128k(u-boot-spl-os)," \
+ "128k(u-boot-env),5m(kernel),-(rootfs)"
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
#endif
#endif
+/*
+ * NOR Size = 16 MiB
+ * Number of Sectors/Blocks = 128
+ * Sector Size = 128 KiB
+ * Word length = 16 bits
+ * Default layout:
+ * 0x000000 - 0x07FFFF : U-Boot (512 KiB)
+ * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB)
+ * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB)
+ * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB)
+ * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
+ */
+#if defined(CONFIG_NOR)
+#undef CONFIG_SYS_NO_FLASH
+#define CONFIG_CMD_FLASH
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_SYS_MAX_FLASH_SECT 128
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_BASE (0x08000000)
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#ifdef CONFIG_NOR_BOOT
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
+#define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */
+#define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */
+#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
+#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
+ "512k(u-boot)," \
+ "128k(u-boot-env1)," \
+ "128k(u-boot-env2)," \
+ "4m(kernel),-(rootfs)"
+#endif
+#endif /* NOR support */
+
#endif /* ! __CONFIG_AM335X_EVM_H */