Merge branch 'master' of /home/stefan/git/u-boot/u-boot into for-1.3.2-ver2

[platform/kernel/u-boot.git] / include / configs / alpr.h

diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 67f62d3..aff9823 100644 (file)
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -29,6 +29,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_ALPR            1           /* Board is ebony           */
 #define CONFIG_440GX           1           /* Specifc GX support       */
+#define CONFIG_440             1           /* ... PPC440 family        */
 #define CONFIG_4xx             1           /* ... PPC4xx family        */
 #define CONFIG_BOARD_EARLY_INIT_F 1        /* Call board_pre_init      */
 #define CONFIG_LAST_STAGE_INIT 1           /* call last_stage_init()   */
@@ -94,7 +95,7 @@
 
 #define CFG_ENV_IS_IN_FLASH     1      /* use FLASH for environment vars       */
 
-#define CFG_ENV_SECT_SIZE      0x10000         /* size of one complete sector  */
+#define CFG_ENV_SECT_SIZE      0x10000 /* size of one complete sector          */
 #define CFG_ENV_ADDR           (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
 #define        CFG_ENV_SIZE            0x2000  /* Total Size of Environment Sector     */
 
@@ -209,25 +210,37 @@
 
 #define CONFIG_NETCONSOLE              /* include NetConsole support   */
 
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_DIAG    | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_NET     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_FPGA    | \
-                               CFG_CMD_NAND    | \
-                               CFG_CMD_REGINFO)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -236,7 +249,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -256,7 +269,7 @@
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_LOOPW            1       /* enable loopw command         */
-#define CONFIG_MX_CYCLIC       1       /* enable mdc/mwc commands      */
+#define CONFIG_MX_CYCLIC       1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE        1       /* include version env variable */
 
@@ -274,7 +287,6 @@
 #define CONFIG_PCI_BOOTDELAY   1       /* enable pci bootdelay variable*/
 
 /* Board-specific PCI */
-#define CFG_PCI_PRE_INIT               /* enable board pci_pre_init()  */
 #define CFG_PCI_TARGET_INIT            /* let board init pci target    */
 #define CFG_PCI_MASTER_INIT
 
@@ -343,12 +355,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ          (8 << 20)       /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE                32768   /* For AMCC 440 CPUs                    */
-#define CFG_CACHELINE_SIZE     32      /* ...                  */
-#define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 
 /*
  * Internal Definitions
@@ -358,7 +364,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
 #define BOOTFLAG_WARM  0x02            /* Software reboot                      */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif