configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig

[platform/kernel/u-boot.git] / include / configs / adp-ag101p.h

diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h
index f506124..d05a4d0 100644 (file)
--- a/include/configs/adp-ag101p.h
+++ b/include/configs/adp-ag101p.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2011 Andes Technology Corporation
  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -14,43 +13,22 @@
 /*
  * CPU and Board Configuration Options
  */
-#define CONFIG_ADP_AG101P
-
 #define CONFIG_USE_INTERRUPT
 
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_SERVERIP
-
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_MEM_REMAP
 #endif
 
 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_TEXT_BASE   0x00500000
 #ifdef CONFIG_OF_CONTROL
 #undef CONFIG_OF_SEPARATE
-#define CONFIG_OF_EMBED
-#endif
-#else
-#ifdef CONFIG_MEM_REMAP
-#define CONFIG_SYS_TEXT_BASE   0x80000000
-#else
-#define CONFIG_SYS_TEXT_BASE   0x00000000
 #endif
 #endif
 
 /*
  * Timer
  */
-#define CONFIG_SYS_CLK_FREQ    39062500
-#define VERSION_CLOCK          CONFIG_SYS_CLK_FREQ
+#define VERSION_CLOCK          get_board_sys_clk()
 
 /*
  * Use Externel CLOCK or PCLK
@@ -87,7 +65,6 @@
  */
 
 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
-#define CONFIG_CONS_INDEX              1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_COM1                CONFIG_FTUART010_02_BASE
 #ifndef CONFIG_DM_SERIAL
@@ -96,28 +73,8 @@
 #define CONFIG_SYS_NS16550_CLK         ((18432000 * 20) / 25)  /* AG101P */
 
 /*
- * SD (MMC) controller
- */
-#define CONFIG_FTSDC010
-#define CONFIG_FTSDC010_NUMBER         1
-#define CONFIG_FTSDC010_SDIO
-
-/*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS     16
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-
-/*
- * Size of malloc() pool
- */
-/* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
-#define CONFIG_SYS_MALLOC_LEN          (512 << 10)
 
 /*
  * AHB Controller configuration
@@ -222,8 +179,6 @@
 #define PHYS_SDRAM_1 \
        (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
 
-#define CONFIG_NR_DRAM_BANKS   2               /* we have 2 bank of DRAM */
-
 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
 #define PHYS_SDRAM_0_SIZE      0x20000000      /* 512 MB */
 #define PHYS_SDRAM_1_SIZE      0x20000000      /* 512 MB */
@@ -248,16 +203,6 @@
 #endif /* CONFIG_MEM_REMAP */
 
 /*
- * Load address and memory test area should agree with
- * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself.
- */
-#define CONFIG_SYS_LOAD_ADDR           0x300000
-
-/* memtest works on 63 MB in DRAM */
-#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM_0
-#define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_0 + 0x03F00000)
-
-/*
  * Static memory controller configuration
  */
 #define CONFIG_FTSMC020
@@ -310,11 +255,8 @@
  * FLASH and environment organization
  */
 /* use CFI framework */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
 
 #define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
 
 /* support JEDEC */
@@ -342,20 +284,13 @@
  * There are 4 banks supported for this Controller,
  * but we have only 1 bank connected to flash on board
  */
-#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
-#endif
 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
 
 /* max number of sectors on one chip */
 #define CONFIG_FLASH_SECTOR_SIZE       (0x10000*2)
-#define CONFIG_ENV_SECT_SIZE           CONFIG_FLASH_SECTOR_SIZE
 #define CONFIG_SYS_MAX_FLASH_SECT      512
 
 /* environments */
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_MONITOR_BASE + 0x140000)
-#define CONFIG_ENV_SIZE                        8192
-#define CONFIG_ENV_OVERWRITE
 
 /*
  * For booting Linux, the board info and command line data