+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
/*
* CPU and Board Configuration Options
*/
-#define CONFIG_ADP_AG101P
-
#define CONFIG_USE_INTERRUPT
#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_GENERIC_GLOBAL_DATA
+#define CONFIG_ARCH_MAP_SYSMEM
-/*
- * Definitions related to passing arguments to kernel.
- */
-#define CONFIG_CMDLINE_TAG /* send commandline to Kernel */
-#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */
-#define CONFIG_INITRD_TAG /* send initrd params */
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_SERVERIP
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_MEM_REMAP
#endif
#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_TEXT_BASE 0x00500000
-#else
-#ifdef CONFIG_MEM_REMAP
-#define CONFIG_SYS_TEXT_BASE 0x80000000
-#else
-#define CONFIG_SYS_TEXT_BASE 0x00000000
+#ifdef CONFIG_OF_CONTROL
+#undef CONFIG_OF_SEPARATE
+#define CONFIG_OF_EMBED
#endif
#endif
*/
/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE
+#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4
+#endif
#define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */
/*
- * Ethernet
- */
-#define CONFIG_FTMAC100
-
-
-/*
- * SD (MMC) controller
- */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FTSDC010
-#define CONFIG_FTSDC010_NUMBER 1
-#define CONFIG_FTSDC010_SDIO
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_DATE
-
-/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/*
* Size of malloc() pool
#define PHYS_SDRAM_1 \
(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
-#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */
-
#ifdef CONFIG_SKIP_LOWLEVEL_INIT
#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
* FLASH and environment organization
*/
/* use CFI framework */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
/* support JEDEC */
* There are 4 banks supported for this Controller,
* but we have only 1 bank connected to flash on board
*/
+#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#endif
#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT 512
/* environments */
-#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x140000)
#define CONFIG_ENV_SIZE 8192
#define CONFIG_ENV_OVERWRITE
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+
+/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ (64 << 20)
+/* Increase max gunzip size */
+#define CONFIG_SYS_BOOTM_LEN (64 << 20)
+
#endif /* __CONFIG_H */