Convert CONFIG_CMD_IDE to Kconfig

[platform/kernel/u-boot.git] / include / configs / a4m072.h

diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h
index cc88ac1..6a26269 100644 (file)
--- a/include/configs/a4m072.h
+++ b/include/configs/a4m072.h
@@ -32,10 +32,8 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE     1       /* console is on PSC1 */
-#define CONFIG_BAUDRATE                9600    /* ... at 9600 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 /* define to enable silent console */
-#define CONFIG_SILENT_CONSOLE
 #define CONFIG_SYS_DEVICE_NULLDEV      1       /* include nulldev device */
 
 /*
@@ -43,10 +41,8 @@
  * 0x40000000 - 0x4fffffff - PCI Memory
  * 0x50000000 - 0x50ffffff - PCI IO Space
  */
-#define CONFIG_PCI
 
 #if defined(CONFIG_PCI)
-#define CONFIG_PCI_PNP         1
 #define CONFIG_PCI_SCAN_SHOW   1
 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE        1
 
@@ -63,13 +59,8 @@
 
 #undef CONFIG_EEPRO100
 
-/* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
 /* USB */
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
 #undef CONFIG_SYS_USB_OHCI_BOARD_INIT
 #define CONFIG_SYS_USB_OHCI_CPU_INIT   1
@@ -87,23 +78,9 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DISPLAY
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
@@ -117,14 +94,9 @@
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY       2       /* autoboot after 2 seconds */
 
 #define CONFIG_SYS_AUTOLOAD    "n"
 
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT         "autoboot in %d seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR      "asdfg"
-
 #undef CONFIG_BOOTARGS
 #define CONFIG_PREBOOT                         "run try_update"
 
@@ -163,7 +135,6 @@
                        "setenv bootargs ${bootargs} no_ethaddr;"       \
                "fi\0"                                                  \
        "hostname=CPUP0\0"                                              \
-       "ethaddr=00:00:00:00:00:00\0"                                   \
        "netdev=eth0\0"                                                 \
        "bootcmd=run bootcmd_nor\0"                                     \
        ""
@@ -173,25 +144,6 @@
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
 
 /*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C                        1       /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE          2       /* Select I2C module #1 or #2 */
-
-#define CONFIG_SYS_I2C_SPEED           100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x52    /* 1010010x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
-#define CONFIG_SYS_EEPROM_WREN                 1
-#define CONFIG_SYS_EEPROM_WP                   GPIO_PSC2_4
-
-/*
  * Flash configuration
  */
 #define CONFIG_SYS_FLASH_BASE          0xFE000000
@@ -234,7 +186,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       MPC5XXX_SRAM
 #define CONFIG_SYS_INIT_RAM_SIZE               MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
 
-
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -267,7 +218,6 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_CMDLINE_EDITING 1
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
 #if defined(CONFIG_CMD_KGDB)
@@ -289,7 +239,6 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
 
-
 /*
  * Various low-level settings
  */
@@ -361,9 +310,6 @@
  * Open firmware flat tree support
  *-----------------------------------------------------------------------
  */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-
 #define OF_CPU                 "PowerPC,5200@0"
 #define OF_SOC                 "soc5200@f0000000"
 #define OF_TBCLK               (bd->bi_busfreq / 4)