Merge branch 'master' of /home/wd/git/u-boot/master

[platform/kernel/u-boot.git] / include / configs / XPEDITE5200.h

diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h
index 370aae1..1fbe4fb 100644 (file)
--- a/include/configs/XPEDITE5200.h
+++ b/include/configs/XPEDITE5200.h
@@ -37,7 +37,6 @@
 #define CONFIG_XPEDITE5200     1
 #define CONFIG_SYS_BOARD_NAME  "XPedite5200"
 #define CONFIG_BOARD_EARLY_INIT_R      /* Call board_pre_init */
-#define CONFIG_RELOC_FIXUP_WORKS       /* Fully relocate to SDRAM */
 
 #define CONFIG_PCI             1       /* Enable PCI/PCIE */
 #define CONFIG_PCI_PNP         1       /* do pci plug-and-play */
@@ -82,7 +81,6 @@
 #define CONFIG_SYS_CCSRBAR             0xef000000      /* relocated CCSRBAR */
 #define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCI1_ADDR   (CONFIG_SYS_CCSRBAR + 0x8000)
 
 /*
  * Diagnostics
@@ -103,7 +101,7 @@
  * 0xfc00_0000 0xffff_ffff     NOR Flash 1             64M non-cacheable
  */
 
-#define CONFIG_SYS_LBC_LCRR    (LCRR_CLKDIV_4 | LCRR_EADC_3)
+#define CONFIG_SYS_LBC_LCRR    (LCRR_CLKDIV_8 | LCRR_EADC_3)
 
 /*
  * NAND flash configuration
@@ -129,6 +127,7 @@
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500             /* Flash Write Timeout (ms) */
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST      { {0xfff40000, 0xc0000}, \
                                                  {0xfbf40000, 0xc0000} }
 #define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor */
@@ -213,9 +212,6 @@
 #define CONFIG_OF_BOARD_SETUP          1
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
-#define CONFIG_SYS_64BIT_VSPRINTF      1
-#define CONFIG_SYS_64BIT_STRTOUL       1
-
 /*
  * I2C
  */
@@ -226,7 +222,6 @@
 #define CONFIG_SYS_I2C_OFFSET          0x3000
 #define CONFIG_SYS_I2C2_OFFSET         0x3100
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 
 /* I2C EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR             0x50
@@ -342,6 +337,7 @@
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SNTP
+#define CONFIG_CMD_REGINFO
 
 /*
  * Miscellaneous configurable options
@@ -355,6 +351,7 @@
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 #define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING 1               /* add command line history     */
+#define CONFIG_AUTO_COMPLETE   1               /* add autocompletion support */
 #define CONFIG_LOADADDR                0x1000000       /* default location for tftp and bootm */
 #define CONFIG_BOOTDELAY       3               /* -1 disables auto-boot */
 #define CONFIG_PANIC_HANG                      /* do not reset board on panic */
@@ -370,6 +367,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN   (16 << 20)      /* Increase max gunzip size */
 
 /*
  * Boot Flags