Merge branch 'master' of /home/wd/git/u-boot/custodians

[platform/kernel/u-boot.git] / include / configs / VCMA9.h

diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 5e614fd..618b7f0 100644 (file)
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2002, 2003
  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
  * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <gj@denx.de>
+ * Gary Jennejohn <garyj@denx.de>
  * David Mueller <d.mueller@elsoft.ch>
  *
  * Configuation settings for the MPL VCMA9 board.
@@ -108,9 +108,10 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_CS8900   1               /* we have a CS8900 on-board */
-#define CS8900_BASE            0x20000300
-#define CS8900_BUS16           1               /* the Linux driver does accesses as shorts */
+#define CONFIG_NET_MULTI
+#define CONFIG_CS8900          /* we have a CS8900 on-board */
+#define CONFIG_CS8900_BASE     0x20000300
+#define CONFIG_CS8900_BUS16    /* the Linux driver does accesses as shorts */
 
 #define CONFIG_DRIVER_S3C24X0_I2C      1       /* we use the buildin I2C controller */
 
@@ -129,7 +130,7 @@
 #define CONFIG_DOS_PARTITION   1
 
 /* Enable needed helper functions */
-#define CONFIG_SYS_DEVICE_DEREGISTER           /* needs device_deregister */
+#define CONFIG_SYS_STDIO_DEREGISTER            /* needs stdio_deregister */
 
 /************************************************************
  * RTC
@@ -246,42 +247,4 @@
 
 #define MULTI_PURPOSE_SOCKET_ADDR 0x08000000
 
-/*-----------------------------------------------------------------------
- * NAND flash settings
- */
-#if defined(CONFIG_CMD_NAND)
-
-#define CONFIG_NAND_LEGACY
-#define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices           */
-#define SECTORSIZE 512
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN    0x00
-#define NAND_MAX_FLOORS 1
-
-#define NAND_WAIT_READY(nand)  NF_WaitRB()
-
-#define NAND_DISABLE_CE(nand)  NF_SetCE(NFCE_HIGH)
-#define NAND_ENABLE_CE(nand)   NF_SetCE(NFCE_LOW)
-
-
-#define WRITE_NAND_COMMAND(d, adr)     NF_Cmd(d)
-#define WRITE_NAND_COMMANDW(d, adr)    NF_CmdW(d)
-#define WRITE_NAND_ADDRESS(d, adr)     NF_Addr(d)
-#define WRITE_NAND(d, adr)             NF_Write(d)
-#define READ_NAND(adr)                 NF_Read()
-/* the following functions are NOP's because S3C24X0 handles this in hardware */
-#define NAND_CTL_CLRALE(nandptr)
-#define NAND_CTL_SETALE(nandptr)
-#define NAND_CTL_CLRCLE(nandptr)
-#define NAND_CTL_SETCLE(nandptr)
-
-#define CONFIG_MTD_NAND_VERIFY_WRITE   1
-#define CONFIG_MTD_NAND_ECC_JFFS2      1
-
-#endif
-
 #endif /* __CONFIG_H */