cmd: add Kconfig option for 'date' command

[platform/kernel/u-boot.git] / include / configs / TQM885D.h

diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index 598020c..eaf0741 100644 (file)
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -22,8 +22,6 @@
 
 #define CONFIG_MPC885          1       /* This is a MPC885 CPU         */
 #define CONFIG_TQM885D         1       /* ...on a TQM88D module        */
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define        CONFIG_SYS_TEXT_BASE    0x40000000
 
@@ -37,11 +35,9 @@
 #define CONFIG_8xx_CONS_SMC1   1       /* Console is on SMC1           */
 #define CONFIG_SYS_SMC_RXBUFLEN        128
 #define CONFIG_SYS_MAXIDLE     10
-#define CONFIG_BAUDRATE                115200  /* console baudrate = 115kbps   */
 
 #define CONFIG_BOOTCOUNT_LIMIT
 
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
 
 #define CONFIG_BOARD_TYPES     1       /* support board types          */
 
@@ -82,8 +78,6 @@
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
-#define CONFIG_STATUS_LED      1       /* Status LED enabled           */
-
 #undef CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
 
 /* enable I2C and select the hardware/software driver */
@@ -124,31 +118,15 @@
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
 #undef CONFIG_RTC_MPC8xx               /* MPC885 does not support RTC  */
 
 #define        CONFIG_TIMESTAMP                /* but print image timestmps    */
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-
 
 /*
  * Miscellaneous configurable options
@@ -156,7 +134,6 @@
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define CONFIG_SYS_HUSH_PARSER         1       /* Use the HUSH parser          */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size      */
@@ -175,11 +152,6 @@
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
 
 /*
- * Enable loopw command.
- */
-#define CONFIG_LOOPW
-
-/*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
@@ -476,9 +448,6 @@
 
 #define CONFIG_ETHPRIME                "SCC"
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
 #define CONFIG_HWCONFIG                1
 
 #endif /* __CONFIG_H */