Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE

[platform/kernel/u-boot.git] / include / configs / TQM866M.h

diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index 421a2d8..c3f3e87 100644 (file)
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -36,6 +36,8 @@
 #define CONFIG_MPC866          1       /* This is a MPC866 CPU         */
 #define CONFIG_TQM866M         1       /* ...on a TQM8xxM module       */
 
+#define        CONFIG_SYS_TEXT_BASE    0x40000000
+
 #define CONFIG_8xx_OSCLK               10000000        /*  10 MHz - PLL input clock    */
 #define CONFIG_SYS_8xx_CPUCLK_MIN              15000000        /*  15 MHz - CPU minimum clock  */
 #define CONFIG_SYS_8xx_CPUCLK_MAX              133000000       /* 133 MHz - CPU maximum clock  */
@@ -51,7 +53,8 @@
 #endif
 
 #define CONFIG_8xx_CONS_SMC1   1       /* Console is on SMC1           */
-
+#define CONFIG_SYS_SMC_RXBUFLEN        128
+#define CONFIG_SYS_MAXIDLE     10
 #define CONFIG_BAUDRATE                115200  /* console baudrate = 115kbps   */
 
 #define CONFIG_BOOTCOUNT_LIMIT
@@ -214,9 +217,9 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2F00  /* End of used area in DPRAM    */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2F00  /* Size of used area in DPRAM   */
 #define CONFIG_SYS_GBL_DATA_SIZE       64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -265,7 +268,9 @@
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
-#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT         "nor0=TQM8xxM-0"
 
 #define MTDPARTS_DEFAULT       "mtdparts=TQM8xxM-0:512k(u-boot),"      \
@@ -493,16 +498,13 @@
                         MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
-#define CONFIG_ETHPRIME                "SCC ETHERNET"
+#define CONFIG_ETHPRIME                "SCC"
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT       1
+#define CONFIG_OF_BOARD_SETUP  1
+#define CONFIG_HWCONFIG                1
 
 #endif /* __CONFIG_H */