Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xx

[platform/kernel/u-boot.git] / include / configs / TQM85xx.h

diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index b0b9dd3..fca5f74 100644 (file)
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -50,6 +50,8 @@
 #define CONFIG_CPM2            1       /* has CPM2                     */
 #endif
 
+#define CONFIG_FSL_LAW         1       /* Use common FSL init code */
+
 /*
  * sysclk for MPC85xx
  *
@@ -87,6 +89,7 @@
  */
 #define CFG_CCSRBAR_DEFAULT    0xFF700000      /* CCSRBAR Default      */
 #define CFG_CCSRBAR            0xE0000000      /* relocated CCSRBAR    */
+#define CFG_CCSRBAR_PHYS       CFG_CCSRBAR     /* physical addr of CCSRBAR */
 #define CFG_IMMR               CFG_CCSRBAR     /* PQII uses CFG_IMMR   */
 
 /*
@@ -94,7 +97,6 @@
  */
 #define CFG_DDR_SDRAM_BASE     0x00000000      /* DDR is system memory */
 #define CFG_SDRAM_BASE         CFG_DDR_SDRAM_BASE
-#define CONFIG_ADD_RAM_INFO    1               /* print additional info*/
 
 #if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560)
 /* TQM8540 & 8560 need DLL-override */
@@ -266,8 +268,12 @@
 #define TSEC2_PHY_ADDR         1
 #define TSEC1_PHYIDX           0
 #define TSEC2_PHYIDX           0
+#define TSEC1_FLAGS            TSEC_GIGABIT
+#define TSEC2_FLAGS            TSEC_GIGABIT
 #define FEC_PHY_ADDR           3
 #define FEC_PHYIDX             0
+#define FEC_FLAGS              0
+#define CONFIG_HAS_ETH0
 #define CONFIG_HAS_ETH1
 #define CONFIG_HAS_ETH2
 
@@ -357,24 +363,35 @@
 
 #define        CONFIG_TIMESTAMP                /* Print image info with ts     */
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_MII
+
 #if defined(CONFIG_PCI)
-# define ADD_PCI_CMD           (CFG_CMD_PCI)
-#else
-# define ADD_PCI_CMD           0
+    #define CONFIG_CMD_PCI
 #endif
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_DHCP   | \
-                                CFG_CMD_NFS    | \
-                                CFG_CMD_SNTP   | \
-                                ADD_PCI_CMD    | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_DATE   | \
-                                CFG_CMD_EEPROM | \
-                                CFG_CMD_DTT    | \
-                                CFG_CMD_MII    | \
-                                CFG_CMD_PING   )
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -385,7 +402,7 @@
 #define CFG_LOAD_ADDR  0x2000000       /* default load address         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
     #define CFG_CBSIZE 1024            /* Console I/O Buffer Size      */
 #else
     #define CFG_CBSIZE 256             /* Console I/O Buffer Size      */
@@ -403,13 +420,6 @@
  */
 #define CFG_BOOTMAPSZ  (8 << 20)       /* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE                32768
-#define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
@@ -418,7 +428,7 @@
 #define BOOTFLAG_COLD  0x01            /* Power-On: Boot from FLASH    */
 #define BOOTFLAG_WARM  0x02            /* Software reboot              */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port*/
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use     */
 #endif
@@ -435,7 +445,7 @@
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs   */
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
-       CFG_BOOTFILE                                                    \
+       "bootfile="CFG_BOOTFILE_PATH"\0"                                \
        "netdev=eth0\0"                                                 \
        "consdev=ttyS0\0"                                               \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
@@ -459,7 +469,7 @@
        "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"   \
                "cp.b 100000 fffc0000 40000;"                           \
                "setenv filesize;saveenv\0"                             \
-       "upd=run load;run update\0"                                     \
+       "upd=run load update\0"                                         \
        ""
 #define CONFIG_BOOTCOMMAND     "run flash_self"