Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE

[platform/kernel/u-boot.git] / include / configs / TQM855M.h

diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 84889ea..e0481f1 100644 (file)
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -36,10 +36,11 @@
 #define CONFIG_MPC855          1       /* This is a MPC855 CPU         */
 #define CONFIG_TQM855M         1       /* ...on a TQM8xxM module       */
 
-#define        CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
+#define        CONFIG_SYS_TEXT_BASE    0x40000000
 
+#define        CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
+#define CONFIG_SYS_SMC_RXBUFLEN        128
+#define CONFIG_SYS_MAXIDLE     10
 #define CONFIG_BAUDRATE                115200  /* console baudrate = 115kbps   */
 
 #define        CONFIG_BOOTCOUNT_LIMIT
@@ -149,6 +150,7 @@
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_JFFS2
@@ -203,9 +205,9 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define        CONFIG_SYS_INIT_RAM_END 0x2F00  /* End of used area in DPRAM    */
+#define        CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
 #define        CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 #define        CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -255,7 +257,9 @@
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
  */
-#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT         "nor0=TQM8xxM-0"
 
 #define MTDPARTS_DEFAULT       "mtdparts=TQM8xxM-0:512k(u-boot),"      \
@@ -503,17 +507,13 @@
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
-#define CONFIG_ETHPRIME                "SCC ETHERNET"
+#define CONFIG_ETHPRIME                "SCC"
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT       1
+#define CONFIG_OF_BOARD_SETUP  1
+#define CONFIG_HWCONFIG                1
 
 #endif /* __CONFIG_H */