Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE

[platform/kernel/u-boot.git] / include / configs / TQM834x.h

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 541a27b..abaae73 100644 (file)
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -37,6 +37,8 @@
 #define CONFIG_MPC8349         1       /* MPC8349 specific */
 #define CONFIG_TQM834X         1       /* TQM834X board specific */
 
+#define        CONFIG_SYS_TEXT_BASE    0x80000000
+
 /* IMMR Base Addres Register, use Freescale default: 0xff400000 */
 #define CONFIG_SYS_IMMR                0xff400000
 
@@ -52,7 +54,8 @@
  * External Local Bus rate is
  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
  */
-#define CONFIG_SYS_LCRR                (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
 
 /* board pre init: do not call, nothing to do */
 #undef CONFIG_BOARD_EARLY_INIT_F
@@ -100,10 +103,6 @@
  * defined as tqm834x_num_flash_banks.
  */
 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT      2
-#ifndef __ASSEMBLY__
-extern int tqm834x_num_flash_banks;
-#endif
-#define CONFIG_SYS_MAX_FLASH_BANKS (tqm834x_num_flash_banks)
 
 #define CONFIG_SYS_MAX_FLASH_SECT              512     /* max sectors per device */
 
@@ -142,7 +141,7 @@ extern int tqm834x_num_flash_banks;
 /*
  * Monitor config
  */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 # define CONFIG_SYS_RAMBOOT
@@ -152,10 +151,10 @@ extern int tqm834x_num_flash_banks;
 
 #define CONFIG_SYS_INIT_RAM_LOCK       1
 #define CONFIG_SYS_INIT_RAM_ADDR       0x20000000      /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END        0x1000          /* End of used area in RAM*/
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000          /* Size of used area in RAM*/
 
 #define CONFIG_SYS_GBL_DATA_SIZE       0x100           /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN         (384 * 1024) /* Reserve 384 kB = 3 sect. for Mon */
@@ -165,7 +164,6 @@ extern int tqm834x_num_flash_banks;
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -247,11 +245,10 @@ extern int tqm834x_num_flash_banks;
 #if defined(CONFIG_PCI)
 
 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
-#define CONFIG_83XX_GENERIC_PCI
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 
 /* PCI1 host bridge */
-#define CONFIG_SYS_PCI1_MEM_BASE       0x80000000
+#define CONFIG_SYS_PCI1_MEM_BASE       0x90000000
 #define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BASE
 #define CONFIG_SYS_PCI1_MEM_SIZE       0x10000000      /* 256M */
 #define CONFIG_SYS_PCI1_MMIO_BASE      (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
@@ -332,6 +329,8 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_SYS_PROMPT              "=> "           /* Monitor Command Prompt */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
+#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
+
 #define CONFIG_SYS_HUSH_PARSER         1       /* Use the HUSH parser          */
 #ifdef CONFIG_SYS_HUSH_PARSER
 #define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
@@ -357,10 +356,10 @@ extern int tqm834x_num_flash_banks;
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (256 << 20)     /* Initial Memory map for Linux*/
 
 #define CONFIG_SYS_HRCW_LOW (\
        HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
@@ -403,7 +402,8 @@ extern int tqm834x_num_flash_banks;
 
 /* i-cache and d-cache disabled */
 #define CONFIG_SYS_HID0_INIT   0x000000000
-#define CONFIG_SYS_HID0_FINAL  CONFIG_SYS_HID0_INIT
+#define CONFIG_SYS_HID0_FINAL  (CONFIG_SYS_HID0_INIT | \
+                                HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2        HID2_HBE
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
@@ -460,14 +460,6 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */