Makefile: move all Power Architecture boards into boards.cfg

[platform/kernel/u-boot.git] / include / configs / TQM834x.h

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 4c909e6..a34e442 100644 (file)
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -37,6 +37,8 @@
 #define CONFIG_MPC8349         1       /* MPC8349 specific */
 #define CONFIG_TQM834X         1       /* TQM834X board specific */
 
+#define        CONFIG_SYS_TEXT_BASE    0x80000000
+
 /* IMMR Base Addres Register, use Freescale default: 0xff400000 */
 #define CONFIG_SYS_IMMR                0xff400000
 
@@ -101,10 +103,6 @@
  * defined as tqm834x_num_flash_banks.
  */
 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT      2
-#ifndef __ASSEMBLY__
-extern int tqm834x_num_flash_banks;
-#endif
-#define CONFIG_SYS_MAX_FLASH_BANKS (tqm834x_num_flash_banks)
 
 #define CONFIG_SYS_MAX_FLASH_SECT              512     /* max sectors per device */
 
@@ -143,7 +141,7 @@ extern int tqm834x_num_flash_banks;
 /*
  * Monitor config
  */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 # define CONFIG_SYS_RAMBOOT
@@ -166,7 +164,6 @@ extern int tqm834x_num_flash_banks;
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -332,6 +329,8 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_SYS_PROMPT              "=> "           /* Monitor Command Prompt */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
+#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
+
 #define CONFIG_SYS_HUSH_PARSER         1       /* Use the HUSH parser          */
 #ifdef CONFIG_SYS_HUSH_PARSER
 #define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
@@ -357,10 +356,10 @@ extern int tqm834x_num_flash_banks;
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (256 << 20)     /* Initial Memory map for Linux*/
 
 #define CONFIG_SYS_HRCW_LOW (\
        HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
@@ -403,7 +402,8 @@ extern int tqm834x_num_flash_banks;
 
 /* i-cache and d-cache disabled */
 #define CONFIG_SYS_HID0_INIT   0x000000000
-#define CONFIG_SYS_HID0_FINAL  CONFIG_SYS_HID0_INIT
+#define CONFIG_SYS_HID0_FINAL  (CONFIG_SYS_HID0_INIT | \
+                                HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2        HID2_HBE
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */