Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references

[platform/kernel/u-boot.git] / include / configs / TQM8272.h

diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index 925bf34..072608c 100644 (file)
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -56,7 +56,7 @@
 #define CONFIG_BAUDRATE                115200
 #endif
 
-#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
 
 #undef CONFIG_BOOTARGS
 
@@ -87,7 +87,7 @@
                "cp.b 300000 40000000 40000;"                           \
                "setenv filesize;saveenv\0"                             \
        "cphwib=cp.b 4003fc00 33fc00 400\0"                             \
-       "upd=run load;run cphwib;run update\0"                          \
+       "upd=run load cphwib update\0"                                  \
        ""
 #define CONFIG_BOOTCOMMAND     "run flash_self"
 
@@ -97,10 +97,6 @@
 /* enable I2C and select the hardware/software driver */
 #undef  CONFIG_HARD_I2C                        /* I2C with hardware support    */
 #define CONFIG_SOFT_I2C                1       /* I2C bit-banged               */
-#define ADD_CMD_I2C            CFG_CMD_I2C     | \
-                               CFG_CMD_DATE    |\
-                               CFG_CMD_DTT     |\
-                               CFG_CMD_EEPROM
 #define CFG_I2C_SPEED          400000  /* I2C speed and slave address  */
 #define CFG_I2C_SLAVE          0x7F
 
@@ -123,7 +119,6 @@
 #define CFG_I2C_EEPROM_ADDR_LEN 2
 #define CFG_EEPROM_PAGE_WRITE_BITS     4
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10      /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE   /* necessary for the LM75 chip */
 #define CFG_I2C_MULTI_EEPROMS          1       /* more than one eeprom */
 
 /* I2C RTC */
@@ -140,7 +135,6 @@
 #else
 #undef CONFIG_HARD_I2C
 #undef CONFIG_SOFT_I2C
-#define ADD_CMD_I2C            0
 #endif
 
 /*
@@ -177,8 +171,7 @@
  * for FCC)
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  *
  * (On TQM8272 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
  * X.29 connector, and FCC2 is hardwired to the X.1 connector)
@@ -272,20 +265,37 @@
 
 #define        CONFIG_TIMESTAMP                /* Print image info with timestamp */
 
-#define CONFIG_BOOTP_MASK      (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
 
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               CFG_CMD_NAND    | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_PING    | \
-                               ADD_CMD_I2C     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_SNTP    )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SNTP
+
+#if CONFIG_I2C
+    #define CONFIG_CMD_I2C
+    #define CONFIG_CMD_DATE
+    #define CONFIG_CMD_DTT
+    #define CONFIG_CMD_EEPROM
+#endif
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 /*
  * Miscellaneous configurable options
@@ -301,7 +311,7 @@
 #endif
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define        CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
 #define        CFG_CBSIZE      256             /* Console I/O Buffer Size      */
@@ -361,7 +371,7 @@
 #define CFG_MAX_FLASH_SECT     128     /* max num of sects on one chip */
 
 #define CFG_FLASH_CFI                          /* flash is CFI compat. */
-#define CFG_FLASH_CFI_DRIVER                   /* Use common CFI driver*/
+#define CONFIG_FLASH_CFI_DRIVER                        /* Use common CFI driver*/
 #define CFG_FLASH_EMPTY_INFO           /* print 'E' for empty sector   */
 #define CFG_FLASH_QUIET_TEST   1       /* don't warn upon unknown flash*/
 
@@ -370,12 +380,12 @@
 
 #define CFG_UPDATE_FLASH_SIZE
 
-#define CFG_ENV_IS_IN_FLASH    1
-#define CFG_ENV_ADDR           (CFG_FLASH_BASE + 0x40000)
-#define CFG_ENV_SIZE           0x20000
-#define CFG_ENV_SECT_SIZE      0x20000
-#define CFG_ENV_ADDR_REDUND    (CFG_ENV_ADDR + CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND    0x20000
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_ADDR                (CFG_FLASH_BASE + 0x40000)
+#define CONFIG_ENV_SIZE                0x20000
+#define CONFIG_ENV_SECT_SIZE   0x20000
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND 0x20000
 
 /* Where is the Hardwareinformation Block (from Monitor Sources) */
 #define MON_RES_LENGTH         (0x0003FC00)
@@ -392,7 +402,7 @@
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------
  */
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
 
 #define CFG_NAND_CS_DIST               0x80
 #define CFG_NAND_UPM_WRITE_CMD_OFS     0x20
@@ -430,7 +440,7 @@
        WRITE_NAND(d, addr); \
 } while(0)
 
-#endif /* CFG_CMD_NAND */
+#endif /* CONFIG_CMD_NAND */
 
 #define        CONFIG_PCI
 #ifdef CONFIG_PCI
@@ -502,7 +512,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 # define CFG_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif