#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#undef CONFIG_BOOTARGS
-#ifdef CONFIG_STK52XX
-# if defined(CONFIG_TQM5200_B)
-# if defined(CFG_LOWBOOT)
-# define ENV_UPDT \
- "update=protect off FC000000 FC07FFFF;" \
- "erase FC000000 FC07FFFF;" \
- "cp.b 200000 FC000000 ${filesize};" \
- "protect on FC000000 FC07FFFF\0"
-# else /* highboot */
-# define ENV_UPDT \
- "update=protect off FFF00000 FFF7FFFF;" \
- "erase FFF00000 FFF7FFFF;" \
+#if defined(CONFIG_TQM5200_B) && !defined(CFG_LOWBOOT)
+# define ENV_UPDT \
+ "update=protect off FFF00000 +${filesize};" \
+ "erase FFF00000 +${filesize};" \
"cp.b 200000 FFF00000 ${filesize};" \
- "protect on FFF00000 FFF7FFFF\0"
-# endif /* CFG_LOWBOOT */
-# else /* !CONFIG_TQM5200_B */
-# define ENV_UPDT \
- "update=protect off FC000000 FC05FFFF;" \
- "erase FC000000 FC05FFFF;" \
- "cp.b 200000 FC000000 ${filesize};" \
- "protect on FC000000 FC05FFFF\0"
-# endif /* CONFIG_TQM5200_B */
-#elif defined (CONFIG_CAM5200)
-# define ENV_UPDT \
- "update=protect off FC000000 FC03FFFF;" \
- "erase FC000000 FC03FFFF;" \
- "cp.b 200000 FC000000 ${filesize};" \
- "protect on FC000000 FC03FFFF\0"
-#elif defined (CONFIG_FO300)
+ "protect on FFF00000 +${filesize}\0"
+#else /* default lowboot configuration */
# define ENV_UPDT \
- "update=protect off FC000000 FC05FFFF;" \
- "erase FC000000 FC05FFFF;" \
+ "update=protect off FC000000 +${filesize};" \
+ "erase FC000000 +${filesize};" \
"cp.b 200000 FC000000 ${filesize};" \
- "protect on FC000000 FC05FFFF\0"
+ "protect on FC000000 +${filesize}\0"
+#endif
+
+#ifndef CONFIG_CAM5200
+#define CUSTOM_ENV_SETTINGS \
+ "bootfile=/tftpboot/tqm5200/uImage\0" \
+ "bootfile_fdt=/tftpboot/tqm5200/uImage_fdt\0" \
+ "fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0" \
+ "u-boot=/tftpboot/tqm5200/u-boot.bin\0"
#else
-# error "Unknown Carrier Board"
-#endif /* CONFIG_STK52XX */
+#define CUSTOM_ENV_SETTINGS \
+ "bootfile=cam5200/uImage\0" \
+ "u-boot=cam5200/u-boot.bin\0" \
+ "setup=tftp 200000 cam5200/setup.img; autoscr 200000\0"
+#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=ttyS0\0" \
+ "kernel_addr=200000\0" \
+ "fdt_addr=400000\0" \
+ "hostname=tqm5200\0" \
"netdev=eth0\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addcons=setenv bootargs ${bootargs} " \
- "console=ttyS0,${baudrate}\0" \
+ "console=${console},${baudrate}\0" \
"flash_self=run ramargs addip addcons;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"flash_nfs=run nfsargs addip addcons;" \
"bootm ${kernel_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \
- "bootm\0" \
- "bootfile=/tftpboot/tqm5200/uImage\0" \
- "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \
+ "net_nfs=tftp ${kernel_addr} ${bootfile};" \
+ "run nfsargs addip addcons;bootm\0" \
+ "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt};" \
+ "tftp ${fdt_addr} ${fdt_file};setenv console ttyPSC0;" \
+ "run nfsargs addip addcons;" \
+ "bootm ${kernel_addr} - ${fdt_addr}\0" \
+ CUSTOM_ENV_SETTINGS \
"load=tftp 200000 ${u-boot}\0" \
ENV_UPDT \
""
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#if defined(CFG_IPBSPEED_133) && !defined(CONFIG_CAM5200)
+#if defined(CFG_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200)
/*
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
- * been tested with a IPB Bus Clock of 66 MHz.
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of
+ * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
*/
-#define CFG_PCISPEED_66 /* define for 66MHz speed */
+#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
#endif
/*
*/
#define CFG_FLASH_BASE 0xFC000000
-#ifndef CONFIG_CAM5200
-/* use CFI flash driver */
-#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
-#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
- (= chip selects) */
-#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
-#else /* CONFIG_CAM5200 */
+#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH)
#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks
(= chip selects) */
#define CFG_FLASH_WORD_SIZE unsigned int /* main flash device with */
#define CFG_FLASH_ADDR1 0x2AA
#define CFG_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */
#define CFG_MAX_FLASH_SECT 128
-#endif /* ifndef CONFIG_CAM5200 */
+#else
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
+ (= chip selects) */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+#endif
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */
*/
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */
-#if defined(CONFIG_TQM5200_B)
+#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200)
#define CFG_ENV_SECT_SIZE 0x40000
#else
#define CFG_ENV_SECT_SIZE 0x20000
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
#define CFG_PROMPT_HUSH_PS2 "> "
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
-#ifdef CFG_PCISPEED_66
+#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
#else
#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
/* Interval between registers */
#define CFG_ATA_STRIDE 4
+/*-----------------------------------------------------------------------
+ * Open firmware flat tree support
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+#define OF_CPU "PowerPC,5200@0"
+#define OF_SOC "soc5200@f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
+
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff