Adjust TQM5200 make targets

[platform/kernel/u-boot.git] / include / configs / TQM5200.h

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 6020998..6b8759f 100644 (file)
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -37,7 +37,6 @@
 #define CONFIG_TQM5200         1       /* ... on TQM5200 module */
 #undef CONFIG_TQM5200_REV100           /*  define for revision 100 modules */
 #define CONFIG_STK52XX         1       /* ... on a STK52XX base board */
-#define CONFIG_STK52XX_REV100  1       /*  define for revision 100 baseboards */
 
 #define CFG_MPC5XXX_CLKIN      33000000 /* ... running at 33.000000MHz */
 
@@ -83,7 +82,7 @@
 #define CONFIG_PCI_IO_SIZE     0x01000000
 
 #define CONFIG_NET_MULTI       1
-#define CONFIG_EEPRO100
+#define CONFIG_EEPRO100                1
 #define CFG_RX_ETH_BUFFER      8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
 #endif /* CONFIG_STK52XX */
@@ -192,16 +191,6 @@
 
 #undef CONFIG_BOOTARGS
 
-#if defined (CONFIG_TQM5200_AA)
-# define CONFIG_U_BOOT_SUFFIX  "-AA\0"
-#elif defined (CONFIG_TQM5200_AB)
-# define CONFIG_U_BOOT_SUFFIX  "-AB\0"
-#elif defined (CONFIG_TQM5200_AC)
-# define CONFIG_U_BOOT_SUFFIX  "-AC\0"
-#else
-# define CONFIG_U_BOOT_SUFFIX  "\0"
-#endif
-
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "netdev=eth0\0"                                                 \
        "rootpath=/opt/eldk/ppc_6xx\0"                                  \
@@ -218,7 +207,7 @@
        "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
        "bootfile=/tftpboot/tqm5200/uImage\0"                           \
        "load=tftp 200000 ${u-boot}\0"                                  \
-       "u-boot=/tftpboot/tqm5200/u-boot.bin"   CONFIG_U_BOOT_SUFFIX    \
+       "u-boot=/tftpboot/tqm5200/u-boot.bin\0"                         \
        "update=protect off FC000000 FC05FFFF;"                         \
                "erase FC000000 FC05FFFF;"                              \
                "cp.b 200000 FC000000 ${filesize};"                     \
@@ -284,13 +273,6 @@
 #endif
 
 /* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB)
-#define I2C_ADDR_LIST  {       CFG_I2C_EEPROM_ADDR,    \
-                               CFG_I2C_SLAVE }
-#elif defined (CONFIG_TQM5200_AC)
-#define I2C_ADDR_LIST  {       CFG_I2C_SLAVE }
-#endif
-
 #if defined (CONFIG_MINIFAP)
 #undef I2C_ADDR_LIST
 #define I2C_ADDR_LIST  {       CFG_I2C_EEPROM_ADDR,    \
@@ -493,13 +475,9 @@
  * SRAM - Do not map below 2 GB in address space, because this area is used
  * for SDRAM autosizing.
  */
-#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
 #define CFG_CS2_START          0xE5000000
-#ifdef CONFIG_TQM5200_AB
-#define CFG_CS2_SIZE           0x80000         /* 512 kByte */
-#else  /* CONFIG_CS_AUTOCONF */
 #define CFG_CS2_SIZE           0x100000        /* 1 MByte */
-#endif
 #define CFG_CS2_CFG            0x0004D930
 #endif
 
@@ -507,8 +485,7 @@
  * Grafic controller - Do not map below 2 GB in address space, because this
  * area is used for SDRAM autosizing.
  */
-#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
-    defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
 #define SM501_FB_BASE          0xE0000000
 #define CFG_CS1_START          (SM501_FB_BASE)
 #define CFG_CS1_SIZE           0x4000000       /* 64 MByte */