*/
#define CFG_MATCH_PARTIAL_CMD
+
/*
- * List of available monitor commands. Use the system default list
- * plus add some of the "non-standard" commands back in.
- * See ./cmd_confdefs.h
- */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_MII | \
- CFG_CMD_BEDBUG \
- )
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_BEDBUG
+
#define CONFIG_AUTOSCRIPT 1
#define CFG_LOADS_BAUD_CHANGE 1
#undef CONFIG_LOADS_ECHO /* NO echo on for serial download */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#if defined (CONFIG_SOFT_I2C)
#define SDA 0x00010
#define SCL 0x00020
-#define DIR immr->im_cpm.cp_pbdir
-#define DAT immr->im_cpm.cp_pbdat
-#define PAR immr->im_cpm.cp_pbpar
-#define ODR immr->im_cpm.cp_pbodr
-#define I2C_INIT {PAR&=~(SDA|SCL);ODR&=~(SDA|SCL);DAT|=(SDA|SCL);DIR|=(SDA|SCL);}
-#define I2C_READ ((DAT&SDA)?1:0)
-#define I2C_SDA(x) {if(x)DAT|=SDA;else DAT&=~SDA;}
-#define I2C_SCL(x) {if(x)DAT|=SCL;else DAT&=~SCL;}
-#define I2C_DELAY {udelay(5);}
-#define I2C_ACTIVE {DIR|=SDA;}
-#define I2C_TRISTATE {DIR&=~SDA;}
+#define __I2C_DIR immr->im_cpm.cp_pbdir
+#define __I2C_DAT immr->im_cpm.cp_pbdat
+#define __I2C_PAR immr->im_cpm.cp_pbpar
+#define __I2C_ODR immr->im_cpm.cp_pbodr
+#define I2C_INIT { __I2C_PAR &= ~(SDA|SCL); \
+ __I2C_ODR &= ~(SDA|SCL); \
+ __I2C_DAT |= (SDA|SCL); \
+ __I2C_DIR|=(SDA|SCL); }
+#define I2C_READ ((__I2C_DAT & SDA) ? 1 : 0)
+#define I2C_SDA(x) { if (x) __I2C_DAT |= SDA; else __I2C_DAT &= ~SDA; }
+#define I2C_SCL(x) { if (x) __I2C_DAT |= SCL; else __I2C_DAT &= ~SCL; }
+#define I2C_DELAY { udelay(5); }
+#define I2C_ACTIVE { __I2C_DIR |= SDA; }
+#define I2C_TRISTATE { __I2C_DIR &= ~SDA; }
#endif
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
* 1 CSR 0 Checkstop reset enable
* 1 LOLRE 0 Loss-of-lock reset enable
* 1 FIOPD 0 Force I/O pull down
- * 5 0 00000
+ * 5 0 00000
*/
#define CFG_PLPRCR (PLPRCR_TEXPS | ((CFG_MF-1)<<20))
* 1 SEME 0 Sync external master enable
* 1 BSC 0 Byte strobe configuration
* 1 GB5E 0 GPL_B5 enable
- * 1 B2DD 0 Bank 2 double drive
- * 1 B3DD 0 Bank 3 double drive
+ * 1 B2DD 0 Bank 2 double drive
+ * 1 B3DD 0 Bank 3 double drive
* 4 0 0000
*/
#define CFG_SIUMCR (SIUMCR_MLRC11)
* 5 0 00000
*/
#define SCCR_MASK 0
-#if CONFIG_EBDF
+#ifdef CONFIG_EBDF
#define CFG_SCCR (SCCR_COM11 | SCCR_TBS | SCCR_EBDF01)
#else
#define CFG_SCCR (SCCR_COM11 | SCCR_TBS)
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"bootp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
/*
* BOOTP options
*/
-#undef CONFIG_BOOTP_MASK
-#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE \
- )
-
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
/*
* Set default IP stuff just to get bootstrap entries into the