Makefile: move all Power Architecture boards into boards.cfg

[platform/kernel/u-boot.git] / include / configs / TB5200.h

diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 92b4fa5..fcadd4a 100644 (file)
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -37,6 +37,17 @@
 #define CONFIG_TQM5200         1       /* ... on TQM5200 module */
 #define CONFIG_TB5200          1       /* ... on a TB5200 base board */
 
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFC000000  boot low (standard configuration with room for
+ *             max 64 MByte Flash ROM)
+ * 0xFFF00000  boot high (for a backup copy of U-Boot)
+ * 0x00100000  boot from RAM (for testing only)
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xFC000000
+#endif
+
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
@@ -126,13 +137,13 @@
 #endif
 
 #ifdef CONFIG_POST
-#define CONFIG__CMD_DIAG
+#define CONFIG_CMD_DIAG
 #endif
 
 
 #define        CONFIG_TIMESTAMP                /* display image timestamps */
 
-#if (TEXT_BASE == 0xFC000000)          /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFC000000)               /* Boot low */
 #   define CONFIG_SYS_LOWBOOT          1
 #endif
 
@@ -251,7 +262,7 @@
 /*
  * Flash configuration
  */
-#define CONFIG_SYS_FLASH_BASE          TEXT_BASE /* 0xFC000000 */
+#define CONFIG_SYS_FLASH_BASE          CONFIG_SYS_TEXT_BASE /* 0xFC000000 */
 
 /* use CFI flash driver */
 #define CONFIG_SYS_FLASH_CFI           1       /* Flash is CFI conformant */
@@ -276,6 +287,8 @@
 
 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT         "nor0=TQM5200-0"
 #if defined(CONFIG_TQM5200_B)
 #define MTDPARTS_DEFAULT       "mtdparts=TQM5200-0:768k(firmware),"    \
@@ -327,7 +340,7 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT          1
 #endif
@@ -428,13 +441,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT           HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL          HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT           0
-#define CONFIG_SYS_HID0_FINAL          0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START        CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE         CONFIG_SYS_FLASH_SIZE