powerpc: P4080DS: Remove macro CONFIG_P4080DS

[platform/kernel/u-boot.git] / include / configs / T4240RDB.h

diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 15b8219..2fac19f 100644 (file)
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -11,7 +11,6 @@
 #define __CONFIG_H
 
 #define CONFIG_T4240RDB
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_FSL_SATA_V2
 #define CONFIG_PCIE4
@@ -20,20 +19,12 @@
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
-#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg
 #ifndef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
 #else
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x00201000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
@@ -44,7 +35,6 @@
 
 #ifdef CONFIG_SDCARD
 #define CONFIG_RESET_VECTOR_ADDRESS    0x200FFC
-#define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
 #define CONFIG_SYS_MMC_U_BOOT_DST      0x00200000
@@ -54,6 +44,7 @@
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
+#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg
 #define CONFIG_SPL_MMC_BOOT
 #endif
 
@@ -90,7 +81,6 @@
 #define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC                 /* Enable IFC Support */
 #define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
-#define CONFIG_PCI                     /* Enable PCI/PCIE */
 #define CONFIG_PCIE1                   /* PCIE controller 1 */
 #define CONFIG_PCIE2                   /* PCIE controller 2 */
 #define CONFIG_PCIE3                   /* PCIE controller 3 */
@@ -259,7 +249,6 @@
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
@@ -714,7 +703,6 @@ unsigned long get_board_ddr_clk(void);
 /*
 * USB
 */
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET