Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY

[platform/kernel/u-boot.git] / include / configs / T208xRDB.h

diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index a90ea11..b31e482 100644 (file)
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2020-2021 NXP
  */
 
 /*
@@ -10,6 +11,8 @@
 #ifndef __T2080RDB_H
 #define __T2080RDB_H
 
+#include <linux/stringify.h>
+
 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
 #define CONFIG_FSL_SATA_V2
 
@@ -17,14 +20,8 @@
 #define CONFIG_SYS_BOOK3E_HV   /* Category E.HV supported */
 #define CONFIG_ENABLE_36BIT_PHYS
 
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP 1
-#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
-#endif
-
 #define CONFIG_SYS_FSL_CPC     /* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC     CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg
@@ -99,14 +96,6 @@
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #endif
 
-#define CONFIG_SYS_MEMTEST_START       0x00200000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x00400000
-
-#if defined(CONFIG_SPIFLASH)
-#elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#endif
-
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
@@ -130,11 +119,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DCSRBAR_PHYS        0xf00000000ull
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM      0
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
 /*
  * DDR Setup
@@ -333,8 +319,7 @@ unsigned long get_board_ddr_clk(void);
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
+#if !CONFIG_IS_ENABLED(DM_I2C)
 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
@@ -347,6 +332,13 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER  0
+#endif
+
+#define CONFIG_SYS_I2C_FSL
+
 #define I2C_MUX_PCA_ADDR_PRI   0x77 /* I2C bus multiplexer,primary */
 #define I2C_MUX_PCA_ADDR_SEC1  0x75 /* I2C bus multiplexer,secondary 1 */
 #define I2C_MUX_PCA_ADDR_SEC2  0x76 /* I2C bus multiplexer,secondary 2 */
@@ -439,26 +431,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_PCIE4_IO_PHYS       0xff8030000ull
 
 #ifdef CONFIG_PCI
-#if !defined(CONFIG_DM_PCI)
-#define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
-#define CONFIG_SYS_PCIE1_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
-#define CONFIG_SYS_PCIE2_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE      0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE2_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
-#define CONFIG_SYS_PCIE3_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE3_MEM_SIZE      0x10000000      /* 256M */
-#define CONFIG_SYS_PCIE3_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE3_IO_SIZE       0x00010000      /* 64k */
-#define CONFIG_SYS_PCIE4_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE4_MEM_SIZE      0x10000000      /* 256M */
-#define CONFIG_SYS_PCIE4_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE4_IO_SIZE       0x00010000      /* 64k */
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #endif
 
@@ -503,7 +475,6 @@ unsigned long get_board_ddr_clk(void);
  * env, so we got 0x110000.
  */
 #define CONFIG_SYS_FMAN_FW_ADDR                0x110000
-#define CONFIG_CORTINA_FW_ADDR         0x120000
 
 #elif defined(CONFIG_SDCARD)
 /*
@@ -512,11 +483,9 @@ unsigned long get_board_ddr_clk(void);
  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
  */
 #define CONFIG_SYS_FMAN_FW_ADDR                (512 * 0x820)
-#define CONFIG_CORTINA_FW_ADDR         (512 * 0x8a0)
 
 #elif defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FMAN_FW_ADDR                (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#define CONFIG_CORTINA_FW_ADDR         (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
  * Slave has no ucode locally, it can fetch this from remote. When implementing
@@ -526,23 +495,24 @@ unsigned long get_board_ddr_clk(void);
  * master LAW->the ucode address in master's memory space.
  */
 #define CONFIG_SYS_FMAN_FW_ADDR                0xFFE00000
-#define CONFIG_CORTINA_FW_ADDR         0xFFE10000
 #else
 #define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
-#define CONFIG_CORTINA_FW_ADDR         0xEFE00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_CORTINA_FW_LENGTH       0x40000
 #define RGMII_PHY1_ADDR                0x01  /* RealTek RTL8211E */
 #define RGMII_PHY2_ADDR                0x02
 #define CORTINA_PHY_ADDR1      0x0c  /* Cortina CS4315 */
 #define CORTINA_PHY_ADDR2      0x0d
-#define FM1_10GEC3_PHY_ADDR    0x00  /* Aquantia AQ1202 10G Base-T */
+/* Aquantia AQ1202 10G Base-T used by board revisions up to C */
+#define FM1_10GEC3_PHY_ADDR    0x00
 #define FM1_10GEC4_PHY_ADDR    0x01
+/* Aquantia AQR113C 10G Base-T used by board revisions D and up */
+#define AQR113C_PHY_ADDR1      0x00
+#define AQR113C_PHY_ADDR2      0x08
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -578,7 +548,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
 /*