Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY

[platform/kernel/u-boot.git] / include / configs / T208xRDB.h

diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 9449e30..b31e482 100644 (file)
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -119,11 +119,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DCSRBAR_PHYS        0xf00000000ull
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM      0
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
 /*
  * DDR Setup
@@ -323,7 +320,6 @@ unsigned long get_board_ddr_clk(void);
  * I2C
  */
 #if !CONFIG_IS_ENABLED(DM_I2C)
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
@@ -435,26 +431,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_PCIE4_IO_PHYS       0xff8030000ull
 
 #ifdef CONFIG_PCI
-#if !defined(CONFIG_DM_PCI)
-#define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
-#define CONFIG_SYS_PCIE1_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
-#define CONFIG_SYS_PCIE2_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE      0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE2_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
-#define CONFIG_SYS_PCIE3_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE3_MEM_SIZE      0x10000000      /* 256M */
-#define CONFIG_SYS_PCIE3_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE3_IO_SIZE       0x00010000      /* 64k */
-#define CONFIG_SYS_PCIE4_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE4_MEM_SIZE      0x10000000      /* 256M */
-#define CONFIG_SYS_PCIE4_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE4_IO_SIZE       0x00010000      /* 64k */
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #endif
 
@@ -499,7 +475,6 @@ unsigned long get_board_ddr_clk(void);
  * env, so we got 0x110000.
  */
 #define CONFIG_SYS_FMAN_FW_ADDR                0x110000
-#define CONFIG_CORTINA_FW_ADDR         0x120000
 
 #elif defined(CONFIG_SDCARD)
 /*
@@ -508,11 +483,9 @@ unsigned long get_board_ddr_clk(void);
  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
  */
 #define CONFIG_SYS_FMAN_FW_ADDR                (512 * 0x820)
-#define CONFIG_CORTINA_FW_ADDR         (512 * 0x8a0)
 
 #elif defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FMAN_FW_ADDR                (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#define CONFIG_CORTINA_FW_ADDR         (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
  * Slave has no ucode locally, it can fetch this from remote. When implementing
@@ -522,17 +495,14 @@ unsigned long get_board_ddr_clk(void);
  * master LAW->the ucode address in master's memory space.
  */
 #define CONFIG_SYS_FMAN_FW_ADDR                0xFFE00000
-#define CONFIG_CORTINA_FW_ADDR         0xFFE10000
 #else
 #define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
-#define CONFIG_CORTINA_FW_ADDR         0xEFE00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_CORTINA_FW_LENGTH       0x40000
 #define RGMII_PHY1_ADDR                0x01  /* RealTek RTL8211E */
 #define RGMII_PHY2_ADDR                0x02
 #define CORTINA_PHY_ADDR1      0x0c  /* Cortina CS4315 */