Convert CONFIG_SYS_NAND_ONFI_DETECTION to Kconfig

[platform/kernel/u-boot.git] / include / configs / T208xRDB.h

diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 7309581..886e0b7 100644 (file)
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -24,8 +24,6 @@
 #define CONFIG_SYS_NUM_CPC     CONFIG_SYS_NUM_DDR_CTLRS
 
 #ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg
-
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_PAD_TO              0x40000
 #define CONFIG_SPL_MAX_SIZE            0x28000
@@ -42,7 +40,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_nand_rcw.cfg
 #endif
 
 #ifdef CONFIG_SPIFLASH
@@ -55,7 +52,6 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_spi_rcw.cfg
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -67,7 +63,6 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_sd_rcw.cfg
 #endif
 
 #endif /* CONFIG_RAMBOOT_PBL */
@@ -90,9 +85,7 @@
  */
 #define CONFIG_SYS_CACHE_STASHING
 #define CONFIG_BTB             /* toggle branch predition */
-#define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #endif
 
@@ -128,7 +121,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
-#define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM 0
 #define CONFIG_SYS_SDRAM_SIZE  2048    /* for fixed parameter use */
 #define SPD_EEPROM_ADDRESS1    0x51
@@ -215,8 +207,6 @@ unsigned long get_board_sys_clk(void);
                                | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
                                | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
 /* ONFI NAND Flash mode0 Timing Params */
 #define CONFIG_SYS_NAND_FTIM0          (FTIM0_NAND_TCCST(0x07) | \
                                        FTIM0_NAND_TWP(0x18)    | \
@@ -234,7 +224,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW                11
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (512 * 1024)
 
 #if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NAND_CSPR_EXT
@@ -299,7 +288,6 @@ unsigned long get_board_sys_clk(void);
                                                GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 #define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
 
 /*
  * Serial Port
@@ -463,8 +451,6 @@ unsigned long get_board_sys_clk(void);
  */
 #define CONFIG_SYS_FMAN_FW_ADDR                (512 * 0x820)
 
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FMAN_FW_ADDR                (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
  * Slave has no ucode locally, it can fetch this from remote. When implementing
@@ -540,7 +526,6 @@ unsigned long get_board_sys_clk(void);
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LOAD_ADDR   0x2000000 /* default load address */
 
 /*
  * For booting Linux, the board info and command line data
@@ -550,11 +535,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_BOOTMAPSZ   (64 << 20)      /* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
-#endif
-
 /*
  * Environment Configuration
  */
@@ -562,8 +542,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_BOOTFILE         "uImage"
 #define CONFIG_UBOOTPATH "u-boot.bin"  /* U-Boot image on TFTP server */
 
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR                1000000
 #define __USB_PHY_TYPE         utmi
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \