projects / platform / kernel / u-boot.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
i2c: fsl_i2c: Migrate to Kconfig
[platform/kernel/u-boot.git] / include / configs / T208xQDS.h
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 54ec1ab..99f5971 100644 (file)
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2011-2013 Freescale Semiconductor, Inc.
+ * Copyright 2020-2021 NXP
  */
 
 /*
@@ -10,27 +11,22 @@
 #ifndef __T208xQDS_H
 #define __T208xQDS_H
 
+#include <linux/stringify.h>
+
 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
 #if defined(CONFIG_ARCH_T2080)
 #define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_SRIO                /* Enable Serial RapidIO Support */
 #define CONFIG_SRIO1           /* SRIO port 1 */
 #define CONFIG_SRIO2           /* SRIO port 2 */
-#elif defined(CONFIG_ARCH_T2081)
 #endif
 
 /* High Level Configuration Options */
 #define CONFIG_SYS_BOOK3E_HV   /* Category E.HV supported */
 #define CONFIG_ENABLE_36BIT_PHYS
 
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP 1
-#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
-#endif
-
 #define CONFIG_SYS_FSL_CPC     /* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC     CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
@@ -46,15 +42,13 @@
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
 #if defined(CONFIG_ARCH_T2080)
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg
-#elif defined(CONFIG_ARCH_T2081)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_nand_rcw.cfg
 #endif
 #endif
 
@@ -70,8 +64,6 @@
 #endif
 #if defined(CONFIG_ARCH_T2080)
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg
-#elif defined(CONFIG_ARCH_T2081)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_spi_rcw.cfg
 #endif
 #endif
 
@@ -86,8 +78,6 @@
 #endif
 #if defined(CONFIG_ARCH_T2080)
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg
-#elif defined(CONFIG_ARCH_T2081)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_sd_rcw.cfg
 #endif
 #endif
 
@@ -117,28 +107,6 @@
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #endif
 
-#if defined(CONFIG_SPIFLASH)
-#define CONFIG_ENV_SIZE                0x2000     /* 8KB */
-#define CONFIG_ENV_OFFSET      0x100000   /* 1MB */
-#define CONFIG_ENV_SECT_SIZE   0x10000
-#elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_OFFSET      (512 * 0x800)
-#elif defined(CONFIG_NAND)
-#define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_OFFSET      (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
-#define CONFIG_ENV_ADDR                0xffe20000
-#define CONFIG_ENV_SIZE                0x2000
-#elif defined(CONFIG_ENV_IS_NOWHERE)
-#define CONFIG_ENV_SIZE                0x2000
-#else
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
-#endif
-
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
@@ -153,9 +121,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_INIT_L3_ADDR                0xFFFC0000
 #define CONFIG_SYS_L3_SIZE             (512 << 10)
 #define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_ENV_ADDR                        (CONFIG_SPL_GD_ADDR + 4 * 1024)
-#endif
+#define SPL_ENV_ADDR                   (CONFIG_SPL_GD_ADDR + 4 * 1024)
 #define CONFIG_SPL_RELOC_MALLOC_ADDR   (CONFIG_SPL_GD_ADDR + 12 * 1024)
 #define CONFIG_SPL_RELOC_MALLOC_SIZE   (50 << 10)
 #define CONFIG_SPL_RELOC_STACK         (CONFIG_SPL_GD_ADDR + 64 * 1024)
@@ -164,11 +130,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DCSRBAR_PHYS        0xf00000000ull
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM      0
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 
 /*
  * DDR Setup
@@ -307,7 +270,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NAND_CSPR_EXT
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK0              CONFIG_SYS_NAND_AMASK
@@ -404,20 +367,7 @@ unsigned long get_board_ddr_clk(void);
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
-#define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
-#define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
-#define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
-#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
-#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
-#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
-#define CONFIG_SYS_FSL_I2C_SPEED   100000
-#define CONFIG_SYS_FSL_I2C2_SPEED  100000
-#define CONFIG_SYS_FSL_I2C3_SPEED  100000
-#define CONFIG_SYS_FSL_I2C4_SPEED  100000
+
 #define I2C_MUX_PCA_ADDR_PRI   0x77 /* I2C bus multiplexer,primary */
 #define I2C_MUX_PCA_ADDR_SEC1  0x75 /* I2C bus multiplexer,secondary 1 */
 #define I2C_MUX_PCA_ADDR_SEC2  0x76 /* I2C bus multiplexer,secondary 2 */
@@ -516,26 +466,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_PCIE4_IO_PHYS       0xff8030000ull
 
 #ifdef CONFIG_PCI
-#if !defined(CONFIG_DM_PCI)
-#define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
-#define CONFIG_SYS_PCIE1_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
-#define CONFIG_SYS_PCIE2_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE      0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE2_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
-#define CONFIG_SYS_PCIE3_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE3_MEM_SIZE      0x10000000      /* 256M */
-#define CONFIG_SYS_PCIE3_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE3_IO_SIZE       0x00010000      /* 64k */
-#define CONFIG_SYS_PCIE4_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE4_MEM_SIZE      0x10000000      /* 256M */
-#define CONFIG_SYS_PCIE4_IO_BUS                0x00000000
-#define CONFIG_SYS_PCIE4_IO_SIZE       0x00010000      /* 64k */
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #endif
 
@@ -587,7 +517,7 @@ unsigned long get_board_ddr_clk(void);
  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
  */
 #define CONFIG_SYS_FMAN_FW_ADDR        (512 * 0x820)
-#elif defined(CONFIG_NAND)
+#elif defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FMAN_FW_ADDR        (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
@@ -606,9 +536,6 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_NOBQFMAN */
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_PHY_VITESSE
-#define CONFIG_PHY_REALTEK
-#define CONFIG_PHY_TERANETICS
 #define RGMII_PHY1_ADDR        0x1
 #define RGMII_PHY2_ADDR        0x2
 #define FM1_10GEC1_PHY_ADDR      0x3
@@ -649,11 +576,8 @@ unsigned long get_board_ddr_clk(void);
  * SDHC
  */
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 #endif
 
 /*
Domain: System / Kernel;