sunxi: usb: Switch to Generic host controllers

[platform/kernel/u-boot.git] / include / configs / T208xQDS.h

diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index e0f6f8b..1dcf277 100644 (file)
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2011-2013 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:     GPL-2.0+
  */
 
 /*
@@ -22,7 +21,6 @@
 
 /* High Level Configuration Options */
 #define CONFIG_SYS_BOOK3E_HV   /* Category E.HV supported */
-#define CONFIG_MP              /* support multiple processors */
 #define CONFIG_ENABLE_36BIT_PHYS
 
 #ifdef CONFIG_PHYS_64BIT
@@ -38,7 +36,6 @@
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
 
 #define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
 #define CONFIG_SPL_PAD_TO              0x40000
 #define CONFIG_SPL_MAX_SIZE            0x28000
@@ -85,7 +82,6 @@
 
 #ifdef CONFIG_SDCARD
 #define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
-#define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
 #define CONFIG_SYS_MMC_U_BOOT_DST      (0x00200000)
 #define CONFIG_SYS_MMC_U_BOOT_START    (0x00200000)
@@ -128,14 +124,7 @@
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #endif
 
-#ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#endif
-
 #if defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_SPI_BUS     0
 #define CONFIG_ENV_SPI_CS      0
 #define CONFIG_ENV_SPI_MAX_HZ  10000000
@@ -144,12 +133,10 @@
 #define CONFIG_ENV_OFFSET      0x100000   /* 1MB */
 #define CONFIG_ENV_SECT_SIZE   0x10000
 #elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_SYS_MMC_ENV_DEV 0
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_OFFSET      (512 * 0x800)
 #elif defined(CONFIG_NAND)
-#define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_OFFSET      (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
@@ -183,7 +170,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_RELOC_MALLOC_ADDR   (CONFIG_SPL_GD_ADDR + 12 * 1024)
 #define CONFIG_SPL_RELOC_MALLOC_SIZE   (50 << 10)
 #define CONFIG_SPL_RELOC_STACK         (CONFIG_SPL_GD_ADDR + 64 * 1024)
-#define CONFIG_SPL_RELOC_STACK_SIZE    (22 << 10)
 
 #define CONFIG_SYS_DCSRBAR     0xf0000000
 #define CONFIG_SYS_DCSRBAR_PHYS        0xf00000000ull
@@ -280,7 +266,7 @@ unsigned long get_board_ddr_clk(void);
                                | CSPR_PORT_SIZE_8 \
                                | CSPR_MSEL_GPCM \
                                | CSPR_V)
-#define CONFIG_SYS_AMASK3      IFC_AMASK(4*1024)
+#define CONFIG_SYS_AMASK3      IFC_AMASK(64 * 1024)
 #define CONFIG_SYS_CSOR3       0x0
 /* QIXIS Timing parameters for IFC CS3 */
 #define CONFIG_SYS_CS3_FTIM0           (FTIM0_GPCM_TACSE(0x0e) | \
@@ -396,8 +382,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_R      /* call board_early_init_r function */
-#define CONFIG_MISC_INIT_R
 #define CONFIG_HWCONFIG
 
 /* define to use L1 as initial stack */
@@ -420,7 +404,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX              1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         (get_bus_freq(0)/2)
@@ -513,8 +496,6 @@ unsigned long get_board_ddr_clk(void);
  * eSPI - Enhanced SPI
  */
 #ifdef CONFIG_SPI_FLASH
-#ifndef CONFIG_SPL_BUILD
-#endif
 
 #define CONFIG_SPI_FLASH_BAR
 #define CONFIG_SF_DEFAULT_SPEED         10000000
@@ -649,7 +630,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_FMAN_ENET
-#define CONFIG_PHYLIB_10G
 #define CONFIG_PHY_VITESSE
 #define CONFIG_PHY_REALTEK
 #define CONFIG_PHY_TERANETICS
@@ -663,7 +643,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_FMAN_ENET
-#define CONFIG_MII             /* MII PHY management */
 #define CONFIG_ETHPRIME                "FM1@DTSEC3"
 #endif
 
@@ -694,7 +673,6 @@ unsigned long get_board_ddr_clk(void);
  * SDHC
  */
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
@@ -705,11 +683,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Dynamic MTD Partition support with mtdparts
  */
-#ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_FLASH_CFI_MTD
-#endif
 
 /*
  * Environment
@@ -720,9 +693,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING         /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE           /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000 /* default load address */
 
 /*