global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDR

[platform/kernel/u-boot.git] / include / configs / T104xRDB.h

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index fb215bb..d1b4deb 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -164,7 +164,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #endif
 
 #define CONFIG_SYS_CLK_FREQ    100000000
-#define CONFIG_DDR_CLK_FREQ    66666666
 
 /*
  * These can be toggled for performance analysis, otherwise use default.
@@ -173,9 +172,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_BACKSIDE_L2_CACHE
 #define CONFIG_SYS_INIT_L2CSR0         L2CSR0_L2E
 #define CONFIG_BTB                     /* toggle branch predition */
-#define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #endif
 
@@ -211,8 +208,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
-#define CONFIG_DDR_SPD
-
 #define CONFIG_SYS_SPD_BUS_NUM 0
 #define SPD_EEPROM_ADDRESS     0x51
 
@@ -452,26 +447,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #endif
 
 /* I2C */
-#if !CONFIG_IS_ENABLED(DM_I2C)
-#define CONFIG_SYS_I2C_LEGACY
-#define CONFIG_SYS_FSL_I2C_SPEED       400000  /* I2C speed in Hz */
-#define CONFIG_SYS_FSL_I2C2_SPEED      400000
-#define CONFIG_SYS_FSL_I2C3_SPEED      400000
-#define CONFIG_SYS_FSL_I2C4_SPEED      400000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
-#define CONFIG_SYS_FSL_I2C3_SLAVE      0x7F
-#define CONFIG_SYS_FSL_I2C4_SLAVE      0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x118000
-#define CONFIG_SYS_FSL_I2C2_OFFSET     0x118100
-#define CONFIG_SYS_FSL_I2C3_OFFSET     0x119000
-#define CONFIG_SYS_FSL_I2C4_OFFSET     0x119100
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER  0
-#endif
 
-#define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
 /* I2C bus multiplexer */
 #define I2C_MUX_PCA_ADDR                0x70
 #define I2C_MUX_CH_DEFAULT      0x8
@@ -701,9 +677,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       "u-boot.bin"    /* U-Boot image on TFTP server*/
 
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR                1000000
-
 #define __USB_PHY_TYPE utmi
 #define RAMDISKFILE    "t104xrdb/ramdisk.uboot"
 
@@ -746,7 +719,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
        "fdtfile=" __stringify(FDTFILE) "\0"                    \
        "bdev=sda3\0"
 
-#define CONFIG_LINUX                       \
+#define LINUXBOOTCOMMAND                       \
        "setenv bootargs root=/dev/ram rw "            \
        "console=$consoledev,$baudrate $othbootargs;"  \
        "setenv ramdiskaddr 0x02000000;"               \
@@ -754,14 +727,14 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
        "setenv loadaddr 0x1000000;"                   \
        "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#define CONFIG_HDBOOT                                  \
+#define HDBOOT                                 \
        "setenv bootargs root=/dev/$bdev rw "           \
        "console=$consoledev,$baudrate $othbootargs;"   \
        "tftp $loadaddr $bootfile;"                     \
        "tftp $fdtaddr $fdtfile;"                       \
        "bootm $loadaddr - $fdtaddr"
 
-#define CONFIG_NFSBOOTCOMMAND                  \
+#define NFSBOOTCOMMAND                 \
        "setenv bootargs root=/dev/nfs rw "     \
        "nfsroot=$serverip:$rootpath "          \
        "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
@@ -770,7 +743,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
        "tftp $fdtaddr $fdtfile;"               \
        "bootm $loadaddr - $fdtaddr"
 
-#define CONFIG_RAMBOOTCOMMAND                          \
+#define RAMBOOTCOMMAND                         \
        "setenv bootargs root=/dev/ram rw "             \
        "console=$consoledev,$baudrate $othbootargs;"   \
        "tftp $ramdiskaddr $ramdiskfile;"               \
@@ -778,7 +751,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
        "tftp $fdtaddr $fdtfile;"                       \
        "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#define CONFIG_BOOTCOMMAND             CONFIG_LINUX
+#define CONFIG_BOOTCOMMAND             LINUXBOOTCOMMAND
 
 #include <asm/fsl_secure_boot.h>