Convert CONFIG_SYS_IMMR to Kconfig

[platform/kernel/u-boot.git] / include / configs / T104xRDB.h

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 7c48c3a..a0db427 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 #ifndef __CONFIG_H
@@ -236,7 +236,6 @@
 #define CONFIG_SYS_CS2_FTIM3           0x0
 
 /* NAND Flash on IFC */
-#define CONFIG_NAND_FSL_IFC
 #define CONFIG_SYS_NAND_BASE           0xff800000
 #define CONFIG_SYS_NAND_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 
@@ -255,8 +254,6 @@
                                | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
                                | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
 /* ONFI NAND Flash mode0 Timing Params */
 #define CONFIG_SYS_NAND_FTIM0          (FTIM0_NAND_TCCST(0x07) | \
                                        FTIM0_NAND_TWP(0x18)   | \
@@ -275,8 +272,6 @@
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (512 * 1024)
-
 #if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NAND_CSPR_EXT
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NAND_CSPR
@@ -465,7 +460,6 @@
 
 #ifdef CONFIG_HAS_FSL_DR_USB
 #ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
 #endif
@@ -504,39 +498,6 @@
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
-#define CONFIG_U_QE
-
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR        0x110000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR        (512 * 0x820)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FMAN_FW_ADDR        (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
-#endif
-
-#if defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_QE_FW_ADDR          0x130000
-#elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_QE_FW_ADDR          (512 * 0x920)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_QE_FW_ADDR          (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
-#define CONFIG_SYS_QE_FW_ADDR          0xEFF10000
-#endif
-
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
 
@@ -645,40 +606,6 @@
        "fdtfile=" __stringify(FDTFILE) "\0"                    \
        "bdev=sda3\0"
 
-#define LINUXBOOTCOMMAND                       \
-       "setenv bootargs root=/dev/ram rw "            \
-       "console=$consoledev,$baudrate $othbootargs;"  \
-       "setenv ramdiskaddr 0x02000000;"               \
-       "setenv fdtaddr 0x00c00000;"                   \
-       "setenv loadaddr 0x1000000;"                   \
-       "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define HDBOOT                                 \
-       "setenv bootargs root=/dev/$bdev rw "           \
-       "console=$consoledev,$baudrate $othbootargs;"   \
-       "tftp $loadaddr $bootfile;"                     \
-       "tftp $fdtaddr $fdtfile;"                       \
-       "bootm $loadaddr - $fdtaddr"
-
-#define NFSBOOTCOMMAND                 \
-       "setenv bootargs root=/dev/nfs rw "     \
-       "nfsroot=$serverip:$rootpath "          \
-       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-       "console=$consoledev,$baudrate $othbootargs;"   \
-       "tftp $loadaddr $bootfile;"             \
-       "tftp $fdtaddr $fdtfile;"               \
-       "bootm $loadaddr - $fdtaddr"
-
-#define RAMBOOTCOMMAND                         \
-       "setenv bootargs root=/dev/ram rw "             \
-       "console=$consoledev,$baudrate $othbootargs;"   \
-       "tftp $ramdiskaddr $ramdiskfile;"               \
-       "tftp $loadaddr $bootfile;"                     \
-       "tftp $fdtaddr $fdtfile;"                       \
-       "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND             LINUXBOOTCOMMAND
-
 #include <asm/fsl_secure_boot.h>
 
 #endif /* __CONFIG_H */