configs: Migrate CONFIG_SYS_LDSCRIPT to Kconfig

[platform/kernel/u-boot.git] / include / configs / T104xRDB.h

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 4cecab3..56ddef0 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -21,7 +21,6 @@
 #endif
 
 #define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE           0xFFFD8000
 #define CONFIG_SPL_PAD_TO              0x40000
 #define CONFIG_SPL_MAX_SIZE            0x28000
 #ifdef CONFIG_SPL_BUILD
@@ -47,7 +46,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
-#define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #ifdef CONFIG_TARGET_T1040RDB
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
@@ -68,7 +66,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
 #endif
-#define CONFIG_SPL_NAND_BOOT
 #endif
 
 #ifdef CONFIG_SPIFLASH
@@ -78,7 +75,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x30000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START      (0x30000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS       (256 << 10)
-#define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #ifndef CONFIG_SPL_BUILD
 #define        CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
@@ -102,7 +98,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 #endif
-#define CONFIG_SPL_SPI_BOOT
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -111,7 +106,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 #define CONFIG_SYS_MMC_U_BOOT_DST      (0x30000000)
 #define CONFIG_SYS_MMC_U_BOOT_START    (0x30000000)
 #define CONFIG_SYS_MMC_U_BOOT_OFFS     (260 << 10)
-#define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #ifndef CONFIG_SPL_BUILD
 #define        CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
@@ -135,7 +129,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #endif
-#define CONFIG_SPL_MMC_BOOT
 #endif
 
 #endif
@@ -521,12 +514,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_SF_DEFAULT_SPEED         10000000
-#define CONFIG_SF_DEFAULT_MODE          0
-#define CONFIG_ENV_SPI_BUS              0
-#define CONFIG_ENV_SPI_CS               0
-#define CONFIG_ENV_SPI_MAX_HZ           10000000
-#define CONFIG_ENV_SPI_MODE             0
 
 /*
  * General PCI
@@ -642,7 +629,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
-#define CONFIG_QE
 #define CONFIG_U_QE
 
 /* Default address of microcode for the Linux Fman driver */
@@ -651,7 +637,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
  * env, so we got 0x110000.
  */
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
 #define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #elif defined(CONFIG_SDCARD)
 /*
@@ -659,13 +644,10 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
  */
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 #define CONFIG_SYS_FMAN_FW_ADDR        (512 * 0x820)
 #elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #define CONFIG_SYS_FMAN_FW_ADDR        (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #endif
 
@@ -684,7 +666,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #endif /* CONFIG_NOBQFMAN */
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
 #define CONFIG_PHY_VITESSE
 #define CONFIG_PHY_REALTEK
 #endif