Convert CONFIG_BTB to Kconfig

[platform/kernel/u-boot.git] / include / configs / T104xRDB.h

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 4485f40..2c4ede9 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 #ifndef __CONFIG_H
@@ -40,7 +40,6 @@
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x30000000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
 #endif
 
 #ifdef CONFIG_SPIFLASH
@@ -85,8 +84,6 @@
 #define CONFIG_PCIE3                   /* PCIE controller 3 */
 #define CONFIG_PCIE4                   /* PCIE controller 4 */
 
-#define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
-
 #if defined(CONFIG_SPIFLASH)
 #elif defined(CONFIG_MTD_RAW_NAND)
 #ifdef CONFIG_NXP_ESBC
@@ -95,15 +92,12 @@
 #endif
 #endif
 
-#define CONFIG_SYS_CLK_FREQ    100000000
-
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
 #define CONFIG_SYS_CACHE_STASHING
 #define CONFIG_BACKSIDE_L2_CACHE
 #define CONFIG_SYS_INIT_L2CSR0         L2CSR0_L2E
-#define CONFIG_BTB                     /* toggle branch predition */
 #ifdef CONFIG_DDR_ECC
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #endif
@@ -180,7 +174,6 @@
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS     45 /* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT      1024    /* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
@@ -367,7 +360,6 @@
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_FSL_DIU_CH7301
 #define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x180000)
-#define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #endif
 #endif
@@ -445,7 +437,6 @@
 /* SATA */
 #define CONFIG_FSL_SATA_V2
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE     1
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1               CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS         FLAGS_DMA
@@ -460,7 +451,6 @@
 
 #ifdef CONFIG_HAS_FSL_DR_USB
 #ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
 #endif
@@ -499,35 +489,6 @@
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
-#define CONFIG_U_QE
-
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR        0x110000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR        (512 * 0x820)
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
-#endif
-
-#if defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_QE_FW_ADDR          0x130000
-#elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_QE_FW_ADDR          (512 * 0x920)
-#else
-#define CONFIG_SYS_QE_FW_ADDR          0xEFF10000
-#endif
-
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
 
@@ -636,40 +597,6 @@
        "fdtfile=" __stringify(FDTFILE) "\0"                    \
        "bdev=sda3\0"
 
-#define LINUXBOOTCOMMAND                       \
-       "setenv bootargs root=/dev/ram rw "            \
-       "console=$consoledev,$baudrate $othbootargs;"  \
-       "setenv ramdiskaddr 0x02000000;"               \
-       "setenv fdtaddr 0x00c00000;"                   \
-       "setenv loadaddr 0x1000000;"                   \
-       "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define HDBOOT                                 \
-       "setenv bootargs root=/dev/$bdev rw "           \
-       "console=$consoledev,$baudrate $othbootargs;"   \
-       "tftp $loadaddr $bootfile;"                     \
-       "tftp $fdtaddr $fdtfile;"                       \
-       "bootm $loadaddr - $fdtaddr"
-
-#define NFSBOOTCOMMAND                 \
-       "setenv bootargs root=/dev/nfs rw "     \
-       "nfsroot=$serverip:$rootpath "          \
-       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-       "console=$consoledev,$baudrate $othbootargs;"   \
-       "tftp $loadaddr $bootfile;"             \
-       "tftp $fdtaddr $fdtfile;"               \
-       "bootm $loadaddr - $fdtaddr"
-
-#define RAMBOOTCOMMAND                         \
-       "setenv bootargs root=/dev/ram rw "             \
-       "console=$consoledev,$baudrate $othbootargs;"   \
-       "tftp $ramdiskaddr $ramdiskfile;"               \
-       "tftp $loadaddr $bootfile;"                     \
-       "tftp $fdtaddr $fdtfile;"                       \
-       "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND             LINUXBOOTCOMMAND
-
 #include <asm/fsl_secure_boot.h>
 
 #endif /* __CONFIG_H */