Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq

[platform/kernel/u-boot.git] / include / configs / T1040QDS.h

diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 89ace7c..cda8251 100644 (file)
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -59,28 +59,9 @@
 
 #ifdef CONFIG_MTD_NOR_FLASH
 #if defined(CONFIG_SPIFLASH)
-#define CONFIG_ENV_SPI_BUS              0
-#define CONFIG_ENV_SPI_CS               0
-#define CONFIG_ENV_SPI_MAX_HZ           10000000
-#define CONFIG_ENV_SPI_MODE             0
-#define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
-#define CONFIG_ENV_SECT_SIZE            0x10000
 #elif defined(CONFIG_SDCARD)
 #define CONFIG_SYS_MMC_ENV_DEV          0
-#define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_ENV_OFFSET              (512 * 1658)
-#elif defined(CONFIG_NAND)
-#define CONFIG_ENV_SIZE                        CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET              (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 #endif
-#else /* CONFIG_MTD_NOR_FLASH */
-#define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 #endif
 
 #ifndef __ASSEMBLY__
@@ -268,7 +249,7 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NAND_CSPR_EXT
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK0              CONFIG_SYS_NAND_AMASK
@@ -500,7 +481,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 #endif
@@ -535,14 +515,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
-#define CONFIG_QE
 /* Default address of microcode for the Linux Fman driver */
 #if defined(CONFIG_SPIFLASH)
 /*
  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
  * env, so we got 0x110000.
  */
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
 #define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #elif defined(CONFIG_SDCARD)
 /*
@@ -550,13 +528,10 @@ unsigned long get_board_ddr_clk(void);
  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
  */
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 #define CONFIG_SYS_FMAN_FW_ADDR        (512 * 1680)
-#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
+#elif defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FMAN_FW_ADDR        (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #define CONFIG_SYS_QE_FW_ADDR          0xEFF10000
 #endif
@@ -565,11 +540,6 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_NOBQFMAN */
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
-#define CONFIG_PHYLIB_10G
-#define CONFIG_PHY_VITESSE
-#define CONFIG_PHY_REALTEK
-#define CONFIG_PHY_TERANETICS
 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E