Merge https://gitlab.denx.de/u-boot/custodians/u-boot-stm

[platform/kernel/u-boot.git] / include / configs / T102xRDB.h

diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 88a6f03..f5c1ec0 100644 (file)
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2020 NXP
  */
 
 /*
@@ -10,20 +11,15 @@
 #ifndef __T1024RDB_H
 #define __T1024RDB_H
 
+#include <linux/stringify.h>
+
 /* High Level Configuration Options */
 #define CONFIG_SYS_BOOK3E_HV           /* Category E.HV supported */
 #define CONFIG_ENABLE_36BIT_PHYS
 
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP                1
-#define CONFIG_SYS_NUM_ADDR_MAP        64      /* number of TLB1 entries */
-#endif
-
 #define CONFIG_SYS_FSL_CPC             /* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC             CONFIG_SYS_NUM_DDR_CTLRS
 
-#define CONFIG_ENV_OVERWRITE
-
 /* support deep sleep */
 #ifdef CONFIG_ARCH_T1024
 #define CONFIG_DEEP_SLEEP
@@ -42,7 +38,7 @@
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x30000000
@@ -162,9 +158,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #endif
 
-#define CONFIG_SYS_MEMTEST_START       0x00200000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x00400000
-
 /*
  *  Config the L3 Cache as L3 SRAM
  */
@@ -333,7 +326,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NAND_CSPR_EXT
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK0              CONFIG_SYS_NAND_AMASK
@@ -434,15 +427,20 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
 #define CONFIG_SYS_FSL_I2C_SPEED       50000   /* I2C speed in Hz */
 #define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
 #define CONFIG_SYS_FSL_I2C2_SPEED      50000   /* I2C speed in Hz */
 #define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
 #define CONFIG_SYS_FSL_I2C_OFFSET      0x118000
 #define CONFIG_SYS_FSL_I2C2_OFFSET     0x118100
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER  0
+#endif
 
+#define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
 #define I2C_PCA6408_BUS_NUM            1
 #define I2C_PCA6408_ADDR               0x20
 
@@ -584,7 +582,7 @@ unsigned long get_board_ddr_clk(void);
  */
 #define CONFIG_SYS_FMAN_FW_ADDR                (512 * 0x820)
 #define CONFIG_SYS_QE_FW_ADDR          (512 * 0x920)
-#elif defined(CONFIG_NAND)
+#elif defined(CONFIG_MTD_RAW_NAND)
 #if defined(CONFIG_TARGET_T1024RDB)
 #define CONFIG_SYS_FMAN_FW_ADDR                (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_SYS_QE_FW_ADDR          (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
@@ -610,7 +608,6 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_NOBQFMAN */
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_PHY_REALTEK
 #if defined(CONFIG_TARGET_T1024RDB)
 #define RGMII_PHY1_ADDR                0x2
 #define RGMII_PHY2_ADDR                0x6