powerpc: E500: Move CONFIG_E500 and CONFIG_E500MC to Kconfig

[platform/kernel/u-boot.git] / include / configs / T102xRDB.h

diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index b457184..c2bdef3 100644 (file)
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -12,9 +12,6 @@
 #define __T1024RDB_H
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500                    /* BOOKE e500 family */
-#define CONFIG_E500MC                  /* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV           /* Category E.HV supported */
 #define CONFIG_MP                      /* support multiple processors */
 #define CONFIG_ENABLE_36BIT_PHYS
@@ -28,30 +25,22 @@
 #define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC                 /* Enable IFC Support */
 
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 
 /* support deep sleep */
-#ifdef CONFIG_PPC_T1024
+#ifdef CONFIG_ARCH_T1024
 #define CONFIG_DEEP_SLEEP
 #endif
 #if defined(CONFIG_DEEP_SLEEP)
-#define CONFIG_SILENT_CONSOLE
 #define CONFIG_BOARD_EARLY_INIT_F
 #endif
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
-#if defined(CONFIG_T1024RDB)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_rcw.cfg
-#elif defined(CONFIG_T1023RDB)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_rcw.cfg
-#endif
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x30001000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
 #define CONFIG_SPL_PAD_TO              0x40000
@@ -71,6 +60,11 @@
 #define CONFIG_SYS_NAND_U_BOOT_START   0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#if defined(CONFIG_T1024RDB)
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg
+#elif defined(CONFIG_T1023RDB)
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg
+#endif
 #define CONFIG_SPL_NAND_BOOT
 #endif
 
@@ -85,6 +79,11 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#if defined(CONFIG_T1024RDB)
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg
+#elif defined(CONFIG_T1023RDB)
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg
+#endif
 #define CONFIG_SPL_SPI_BOOT
 #endif
 
@@ -99,6 +98,11 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#if defined(CONFIG_T1024RDB)
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg
+#elif defined(CONFIG_T1023RDB)
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg
+#endif
 #define CONFIG_SPL_MMC_BOOT
 #endif
 
@@ -494,17 +498,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x11C600)
 #define CONFIG_SYS_NS16550_COM3        (CONFIG_SYS_CCSRBAR+0x11D500)
 #define CONFIG_SYS_NS16550_COM4        (CONFIG_SYS_CCSRBAR+0x11D600)
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
 
 /* Video */
 #undef CONFIG_FSL_DIU_FB       /* RDB doesn't support DIU */
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x180000)
-#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
@@ -549,11 +548,10 @@ unsigned long get_board_ddr_clk(void);
  * General PCIe
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_PCI             /* Enable PCI/PCIE */
 #define CONFIG_PCIE1           /* PCIE controller 1 */
 #define CONFIG_PCIE2           /* PCIE controller 2 */
 #define CONFIG_PCIE3           /* PCIE controller 3 */
-#ifdef CONFIG_PPC_T1040
+#ifdef CONFIG_ARCH_T1040
 #define CONFIG_PCIE4           /* PCIE controller 4 */
 #endif
 #define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
@@ -645,7 +643,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_PCIE4_IO_SIZE       0x00010000      /* 64k */
 #endif
 
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
 #endif /* CONFIG_PCI */
@@ -664,7 +661,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * SDHC
  */
-#define CONFIG_MMC
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
@@ -856,7 +852,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_BAUDRATE                115200
 #define __USB_PHY_TYPE         utmi
 
-#ifdef CONFIG_PPC_T1024
+#ifdef CONFIG_ARCH_T1024
 #define CONFIG_BOARDNAME t1024rdb
 #define BANK_INTLV cs0_cs1
 #else