ARM: omap3_logic: Add NOR Flash Support for SOM-LV

[platform/kernel/u-boot.git] / include / configs / T102xQDS.h

diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index 301bf9f..42bfd07 100644 (file)
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:     GPL-2.0+
  */
 
 /*
@@ -13,7 +12,6 @@
 
 /* High Level Configuration Options */
 #define CONFIG_SYS_BOOK3E_HV           /* Category E.HV supported */
-#define CONFIG_MP                      /* support multiple processors */
 #define CONFIG_ENABLE_36BIT_PHYS
 
 #ifdef CONFIG_PHYS_64BIT
@@ -31,7 +29,6 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
 #define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
 #define CONFIG_SPL_PAD_TO              0x40000
 #define CONFIG_SPL_MAX_SIZE            0x28000
@@ -88,12 +85,6 @@
 #define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
 #endif
 
-#ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#endif
-
 /* PCIe Boot - Master */
 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 /*
@@ -138,7 +129,6 @@
 #endif
 
 #if defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_SPI_BUS             0
 #define CONFIG_ENV_SPI_CS              0
 #define CONFIG_ENV_SPI_MAX_HZ          10000000
@@ -147,12 +137,10 @@
 #define CONFIG_ENV_OFFSET              0x100000        /* 1MB */
 #define CONFIG_ENV_SECT_SIZE           0x10000
 #elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_OFFSET              (512 * 0x800)
 #elif defined(CONFIG_NAND)
-#define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_OFFSET              (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
@@ -202,7 +190,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_RELOC_MALLOC_ADDR   (CONFIG_SPL_GD_ADDR + 12 * 1024)
 #define CONFIG_SPL_RELOC_MALLOC_SIZE   (30 << 10)
 #define CONFIG_SPL_RELOC_STACK         (CONFIG_SPL_GD_ADDR + 64 * 1024)
-#define CONFIG_SPL_RELOC_STACK_SIZE    (22 << 10)
 
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_DCSRBAR             0xf0000000
@@ -422,8 +409,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_HWCONFIG
 
 /* define to use L1 as initial stack */
@@ -516,8 +501,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * eSPI - Enhanced SPI
  */
-#ifndef CONFIG_SPL_BUILD
-#endif
 #define CONFIG_SPI_FLASH_BAR
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE   0
@@ -626,7 +609,6 @@ unsigned long get_board_ddr_clk(void);
  * SDHC
  */
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
@@ -668,7 +650,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DPAA_FMAN
 
 #define CONFIG_QE
-#define CONFIG_U_QE
 /* Default address of microcode for the Linux FMan driver */
 #if defined(CONFIG_SPIFLASH)
 /*
@@ -728,18 +709,12 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_FMAN_ENET
-#define CONFIG_MII             /* MII PHY management */
 #define CONFIG_ETHPRIME                "FM1@DTSEC4"
 #endif
 
 /*
  * Dynamic MTD Partition support with mtdparts
  */
-#ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_FLASH_CFI_MTD
-#endif
 
 /*
  * Environment