Convert CONFIG_SPL_LIBCOMMON_SUPPORT to Kconfig

[platform/kernel/u-boot.git] / include / configs / T102xQDS.h

diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index f07b2d1..2532b88 100644 (file)
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -18,7 +18,6 @@
 #define CONFIG_E500MC                  /* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV           /* Category E.HV supported */
 #define CONFIG_MP                      /* support multiple processors */
-#define CONFIG_PHYS_64BIT
 #define CONFIG_ENABLE_36BIT_PHYS
 
 #ifdef CONFIG_PHYS_64BIT
@@ -45,14 +44,10 @@
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x00201000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
@@ -202,7 +197,6 @@
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 #endif
 
-
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
@@ -510,10 +504,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NS16550_COM4        (CONFIG_SYS_CCSRBAR+0x11D600)
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
 /* Video */
 #ifdef CONFIG_PPC_T1024                /* no DIU on T1023 */
 #define CONFIG_FSL_DIU_FB
@@ -573,7 +563,6 @@ unsigned long get_board_ddr_clk(void);
  */
 #ifndef CONFIG_SPL_BUILD
 #endif
-#define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH_BAR
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE   0
@@ -583,9 +572,9 @@ unsigned long get_board_ddr_clk(void);
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CONFIG_PCI             /* Enable PCI/PCIE */
-#define CONFIG_PCIE1           /* PCIE controler 1 */
-#define CONFIG_PCIE2           /* PCIE controler 2 */
-#define CONFIG_PCIE3           /* PCIE controler 3 */
+#define CONFIG_PCIE1           /* PCIE controller 1 */
+#define CONFIG_PCIE2           /* PCIE controller 2 */
+#define CONFIG_PCIE3           /* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT   /* enable 64-bit PCI resources */
 #define CONFIG_PCI_INDIRECT_BRIDGE
@@ -673,7 +662,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 /*
@@ -683,11 +671,8 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_CMD_EXT2
 #endif
 
 /*
@@ -697,10 +682,7 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -835,14 +817,9 @@ unsigned long get_board_ddr_clk(void);
  * Command line configuration.
  */
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -884,11 +861,9 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       "u-boot.bin" /* U-Boot image on TFTP server */
 #define CONFIG_LOADADDR                1000000 /* default location for tftp, bootm */
-#define CONFIG_BOOTDELAY       10      /* -1 disables auto-boot */
 #define CONFIG_BAUDRATE                115200
 #define __USB_PHY_TYPE         utmi
 
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
        "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0"  \
        "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \