Change all '$(...)' variable references into '${...}'

[platform/kernel/u-boot.git] / include / configs / Sandpoint8240.h

diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index 799d5d6..f4339ec 100644 (file)
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -46,19 +46,54 @@
 #endif
 
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_BAUDRATE                115200
-#define CONFIG_DRAM_SPEED      100             /* MHz                          */
-
-#define CONFIG_COMMANDS                ( (CONFIG_CMD_DFL & ~CFG_CMD_AUTOSCRIPT) | \
-                                 CFG_CMD_ELF    | \
-                                 CFG_CMD_I2C    | \
-                                 CFG_CMD_SDRAM  | \
-                                 CFG_CMD_EEPROM | \
-                                 CFG_CMD_PCI )
+#define CONFIG_BAUDRATE                9600
+
+#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
+
+#define        CONFIG_TIMESTAMP                /* Print image info with timestamp */
+
+#define CONFIG_PREBOOT "echo;" \
+       "echo Type \"run net_nfs\" to mount root filesystem over NFS;" \
+       "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
+       "netdev=eth0\0"                                                 \
+       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
+               "nfsroot=${serverip}:${rootpath}\0"                     \
+       "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
+       "addip=setenv bootargs ${bootargs} "                            \
+               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+               ":${hostname}:${netdev}:off panic=1\0"                  \
+       "net_self=tftp ${kernel_addr} ${bootfile};"                     \
+               "tftp ${ramdisk_addr} ${ramdisk};"                      \
+               "run ramargs addip;"                                    \
+               "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
+       "net_nfs=tftp ${kernel_addr} ${bootfile};"                      \
+               "run nfsargs addip;bootm\0"                             \
+       "rootpath=/opt/eldk/ppc_82xx\0"                                 \
+       "bootfile=/tftpboot/SP8240/uImage\0"                            \
+       "ramdisk=/tftpboot/SP8240/uRamdisk\0"                           \
+       "kernel_addr=200000\0"                                          \
+       "ramdisk_addr=400000\0"                                         \
+       ""
+#define CONFIG_BOOTCOMMAND     "run flash_self"
+
+#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
+                               CFG_CMD_DHCP    | \
+                               CFG_CMD_ELF     | \
+                               CFG_CMD_I2C     | \
+                               CFG_CMD_SDRAM   | \
+                               CFG_CMD_EEPROM  | \
+                               CFG_CMD_NFS     | \
+                               CFG_CMD_PCI     | \
+                               CFG_CMD_SNTP    )
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any)      */
 #include <cmd_confdefs.h>
 
+#define CONFIG_DRAM_SPEED      100             /* MHz                          */
 
 /*
  * Miscellaneous configurable options
@@ -237,7 +272,7 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ  33000000  /* external frequency to pll */
-#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2
+#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  1
 
 #define CFG_ROMNAL             7       /*rom/flash next access time            */
 #define CFG_ROMFAL             11      /*rom/flash access time                 */