tizen 2.3.1 release

[platform/kernel/u-boot.git] / include / configs / Sandpoint8240.h

diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index 2c0cb89..524a3e0 100644 (file)
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -2,7 +2,23 @@
  * (C) Copyright 2001-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * SPDX-License-Identifier:    GPL-2.0+
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
  */
 
 /* ------------------------------------------------------------------------- */
@@ -19,6 +35,7 @@
  * (easy to change)
  */
 
+#define CONFIG_MPC824X         1
 #define CONFIG_MPC8240         1
 #define CONFIG_SANDPOINT       1
 
@@ -97,20 +114,22 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            1               /* undef to save memory         */
+#define CONFIG_SYS_PROMPT              "=> "           /* Monitor Command Prompt       */
 #define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)     /* Print Buffer Size    */
 #define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR           0x00100000      /* default load address         */
+#define CONFIG_SYS_HZ                  1000            /* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
  */
 #define CONFIG_PCI                             /* include pci support          */
-#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #undef CONFIG_PCI_PNP
 
+#define CONFIG_NET_MULTI                       /* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
@@ -183,16 +202,13 @@
  * If the software driver is chosen, there are some additional
  * configuration items that the driver uses to drive the port pins.
  */
-#define CONFIG_HARD_I2C                1               /* To enable I2C support */
-#undef  CONFIG_SYS_I2C_SOFT
-#define CONFIG_SYS_I2C_SLAVE   0x7F
-#define CONFIG_SYS_I2C_SPEED   400000
+#define CONFIG_HARD_I2C                1               /* To enable I2C support        */
+#undef  CONFIG_SOFT_I2C                                /* I2C bit-banged               */
+#define CONFIG_SYS_I2C_SPEED           400000          /* I2C speed and slave address  */
+#define CONFIG_SYS_I2C_SLAVE           0x7F
 
-#ifdef CONFIG_SYS_I2C_SOFT
+#ifdef CONFIG_SOFT_I2C
 #error "Soft I2C is not configured properly.  Please review!"
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT_SPEED      50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE      0xFE
 #define I2C_PORT               3               /* Port A=0, B=1, C=2, D=3 */
 #define I2C_ACTIVE             (iop->pdir |=  0x00010000)
 #define I2C_TRISTATE           (iop->pdir &= ~0x00010000)
@@ -202,7 +218,7 @@
 #define I2C_SCL(bit)           if(bit) iop->pdat |=  0x00020000; \
                                else    iop->pdat &= ~0x00020000
 #define I2C_DELAY              udelay(5)       /* 1/4 I2C clock duration */
-#endif /* CONFIG_SYS_I2C_SOFT */
+#endif /* CONFIG_SOFT_I2C */
 
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57            /* EEPROM IS24C02               */
@@ -211,6 +227,7 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10      /* takes up to 10 msec          */
 
 
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_SYS_FLASH_BANKS         { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
 
 /*-----------------------------------------------------------------------