rename CFG_ENV macros to CONFIG_ENV

[platform/kernel/u-boot.git] / include / configs / SXNI855T.h

diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index bdaf683..0cc4fe4 100644 (file)
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -81,6 +81,8 @@
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
 #endif
 
+#define CONFIG_HAS_ETH1
+
 /*-----------------------------------------------------------------------
  * Definitions for status LED
  */
@@ -140,18 +142,60 @@
 # define CFG_I2C_EEPROM_ADDR_LEN 2     /* two byte address             */
 
 #define        CONFIG_FEC_ENET         1       /* use FEC ethernet  */
+#define        CONFIG_MII              1
 
 #define CFG_DISCOVER_PHY
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL         | \
-                                CFG_CMD_EEPROM         | \
-                                CFG_CMD_NAND           | \
-                                CFG_CMD_DATE)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DATE
+
+
+#define CFG_JFFS2_SORT_FRAGMENTS
+
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+
+/*
+#define CONFIG_JFFS2_DEV               "nor0"
+#define CONFIG_JFFS2_PART_SIZE         0x00780000
+#define CONFIG_JFFS2_PART_OFFSET       0x00080000
+*/
+
+#define CONFIG_JFFS2_DEV               "nand0"
+#define CONFIG_JFFS2_PART_SIZE         0x00200000
+#define CONFIG_JFFS2_PART_OFFSET       0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT         "nor0=sixnet-0,nand0=sixnet-nand"
+#define MTDPARTS_DEFAULT       "mtdparts=sixnet-0:7680k@512k();sixnet-nand:2m(jffs2-nand)"
+*/
 
 /* NAND flash support */
+#define CONFIG_NAND_LEGACY
 #define CONFIG_MTD_NAND_ECC_JFFS2
 #define CFG_MAX_NAND_DEVICE    1       /* Max number of NAND devices   */
 #define SECTORSIZE 512
@@ -160,7 +204,7 @@
 #define ADDR_PAGE 2
 #define ADDR_COLUMN_PAGE 3
 
-#define NAND_ChipID_UNKNOWN    0x00
+#define NAND_ChipID_UNKNOWN    0x00
 #define NAND_MAX_FLOORS 1
 #define NAND_MAX_CHIPS 1
 
@@ -194,7 +238,7 @@
  */
 #define        CFG_LONGHELP                    /* undef to save a little memory */
 #define        CFG_PROMPT              "=>"    /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define        CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
 #define        CFG_CBSIZE      256             /* Console I/O Buffer Size      */
@@ -206,7 +250,7 @@
 #define CFG_MEMTEST_START      0x0100000       /* memtest works on     */
 #define CFG_MEMTEST_END                0x0400000       /* 1 ... 4 MB in DRAM   */
 
-#define CFG_LOAD_ADDR          0x00100000
+#define CFG_LOAD_ADDR          0x00100000
 
 #define        CFG_HZ          1000            /* decrementer freq: 1 ms ticks */
 
@@ -277,7 +321,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     16      /* For all MPC8xx CPUs                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    4       /* log base 2 of the above value        */
 #endif
 
@@ -405,18 +449,23 @@
 
 #define CONFIG_RESET_ON_PANIC          /* reset if system panic() */
 
-/* to put environment in EEROM */
-#define        CFG_ENV_IS_IN_EEPROM    1
-#define CFG_ENV_OFFSET         0       /* Start right at beginning of NVRAM */
-#define CFG_ENV_SIZE           1024    /* Use only a part of it*/
-
-#if 1
-#define CONFIG_BOOT_RETRY_TIME 60      /* boot if no command in 60 seconds */
+#define CONFIG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
+  /* environment is in FLASH */
+  #define CONFIG_ENV_ADDR              0xF8040000      /* AM29LV641 or AM29LV800BT */
+  #define CONFIG_ENV_ADDR_REDUND       0xF8050000      /* AM29LV641 or AM29LV800BT */
+  #define CONFIG_ENV_SECT_SIZE 0x00010000
+  #define CONFIG_ENV_SIZE              0x00002000
+#else
+  /* environment is in EEPROM */
+  #define CONFIG_ENV_IS_IN_EEPROM              1
+  #define CONFIG_ENV_OFFSET            0       /* at beginning of EEPROM */
+  #define CONFIG_ENV_SIZE                   1024       /* Use only a part of it*/
 #endif
 
 #if 1
 #define CONFIG_AUTOBOOT_KEYED          /* use key strings to stop autoboot */
-#define CONFIG_AUTOBOOT_PROMPT         "autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT         "autoboot in %d seconds\n", bootdelay
 #define CONFIG_AUTOBOOT_DELAY_STR      "delayabit"
 #define CONFIG_AUTOBOOT_STOP_STR       " " /* easy to stop for now */
 #endif