global: Migrate CONFIG_MXC_UART_BASE to CFG

[platform/kernel/u-boot.git] / include / configs / SBx81LIFXCAT.h

diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h
index bbd3ccc..bdbf9d4 100644 (file)
--- a/include/configs/SBx81LIFXCAT.h
+++ b/include/configs/SBx81LIFXCAT.h
@@ -7,19 +7,13 @@
 #define _CONFIG_SBX81LIFXCAT_H
 
 /* additions for new ARM relocation support */
-#define CONFIG_SYS_SDRAM_BASE  0x00000000
-
-#define CONFIG_KIRKWOOD_EGIGA_INIT     /* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_PCIE_INIT      /* Enable PCIE Port0 */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8  /* Set RGMII Pad voltage to 1.8V */
+#define CFG_SYS_SDRAM_BASE     0x00000000
 
 /*
  * NS16550 Configuration
  */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
-#define CONFIG_SYS_NS16550_CLK         CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1                KW_UART0_BASE
+#define CFG_SYS_NS16550_CLK            CFG_SYS_TCLK
+#define CFG_SYS_NS16550_COM1           KW_UART0_BASE
 
 /*
  * Serial Port configuration
@@ -27,7 +21,6 @@
  * for your console driver.
  */
 
-#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
 #define MTDPARTS_MTDOOPS "errlog"
 
 /*
@@ -38,27 +31,15 @@
  * U-Boot bootcode configuration
  */
 
-#define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for monitor */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Mem map for Linux*/
+#define CFG_SYS_BOOTMAPSZ              (8 << 20)       /* Initial Mem map for Linux*/
 
 /* size in bytes reserved for initial data */
 
 #include <asm/arch/config.h>
-/* There is no PHY directly connected so don't ask it for link status */
-#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS     {1, 0}  /* enable a single port */
-#define CONFIG_PHY_BASE_ADR    0x01
-#endif /* CONFIG_CMD_NET */
 
 #endif /* _CONFIG_SBX81LIFXCAT_H */