Makefile: move all Power Architecture boards into boards.cfg

[platform/kernel/u-boot.git] / include / configs / SBC8540.h

diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 7239f84..9cc87dd 100644 (file)
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -24,27 +24,32 @@
  * MA 02111-1307 USA
  */
 
-/* mpc8560ads board configuration file */
-/* please refer to doc/README.mpc85xx for more info */
-/* make sure you change the MAC address and other network params first,
- * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+/*
+ * sbc8540 board configuration file.
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#if XXX
-#define DEBUG                /* General debug */
-#define ET_DEBUG
+/*
+ * Top level Makefile configuration choices
+ */
+#ifdef CONFIG_66
+#define CONFIG_PCI_66
 #endif
+
 #define TSEC_DEBUG
 
-/* High Level Configuration Options */
+/*
+ * High Level Configuration Options
+ */
 #define CONFIG_BOOKE           1       /* BOOKE                        */
 #define CONFIG_E500            1       /* BOOKE e500 family            */
 #define CONFIG_MPC85xx         1       /* MPC8540/MPC8560              */
 #define CONFIG_MPC85xx_REV1    1       /* MPC85xx Rev 1.0 chip         */
 
+#define        CONFIG_SYS_TEXT_BASE    0xfffc0000
+
 
 #define CONFIG_CPM2            1       /* has CPM2 */
 
@@ -77,6 +82,7 @@
 #undef CONFIG_BTB                          /* toggle branch predition  */
 
 #define CONFIG_BOARD_EARLY_INIT_F 1        /* Call board_early_init_f  */
+#define CONFIG_RESET_PHY_R     1           /* Call reset_phy() */
 
 #undef CONFIG_SYS_DRAM_TEST                        /* memory test, takes time  */
 #define CONFIG_SYS_MEMTEST_START       0x00200000  /* memtest region */
@@ -201,7 +207,6 @@
 #undef CONFIG_CONS_NONE                        /* define if console on something else */
 
 #define CONFIG_CONS_INDEX     1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -286,6 +291,10 @@
    * GPIO pins used for bit-banged MII communications
    */
   #define MDIO_PORT    2               /* Port C */
+  #define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
+                               (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
+  #define MDC_DECLARE  MDIO_DECLARE
+
   #define MDIO_ACTIVE  (iop->pdir |=  0x00400000)
   #define MDIO_TRISTATE        (iop->pdir &= ~0x00400000)
   #define MDIO_READ    ((iop->pdat &  0x00400000) != 0)
@@ -317,7 +326,7 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT    200000          /* Timeout for Flash Erase (in ms)      */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    50000           /* Timeout for Flash Write (in ms)      */
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor     */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor     */
 
 #if 0
 /* XXX This doesn't work and I don't want to fix it */
@@ -372,6 +381,7 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI