qong: enable support for compressed images

[platform/kernel/u-boot.git] / include / configs / Rattler.h

diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index e630afe..9ddf626 100644 (file)
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -33,6 +33,8 @@
 #define CPU_ID_STR             "MPC8250"
 #endif /* CONFIG_MPC8248 */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFE000000
+
 #define CONFIG_CPM2            1       /* Has a CPM2 */
 
 #define CONFIG_RATTLER                 /* Analogue&Micro Rattler board */
@@ -78,8 +80,8 @@
  * - BDs/buffers on 60x bus
  * - Full duplex
  */
-#define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE        (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
+#define CONFIG_SYS_CMXFCR_MASK1                (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE1       (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
 #define CONFIG_SYS_CPMFCR_RAMTYPE      0
 #define CONFIG_SYS_FCC_PSMR            (FCC_PSMR_FDE | FCC_PSMR_LPB)
 
@@ -90,8 +92,8 @@
  * - BDs/buffers on 60x bus
  * - Full duplex
  */
-#define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE        (CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK14)
+#define CONFIG_SYS_CMXFCR_MASK2                (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE2       (CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK14)
 #define CONFIG_SYS_CPMFCR_RAMTYPE      0
 #define CONFIG_SYS_FCC_PSMR            (FCC_PSMR_FDE | FCC_PSMR_LPB)
 
@@ -220,7 +222,7 @@
 */
 #endif /* CONFIG_CMD_JFFS2 */
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
 #endif
@@ -239,9 +241,8 @@
 #define CONFIG_SYS_IMMR                0xF0000000
 
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2000  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2000  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_SDRAM_BASE          0x00000000
@@ -262,9 +263,6 @@
 #define CONFIG_SYS_HRCW_SLAVE6         0
 #define CONFIG_SYS_HRCW_SLAVE7         0
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                  */
-
 #define CONFIG_SYS_MALLOC_LEN          (4096 << 10)    /* Reserve 4 MB for malloc()    */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */