rename CFG_ENV macros to CONFIG_ENV

[platform/kernel/u-boot.git] / include / configs / Rattler.h

diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index dbc57e8..6ec52e6 100644 (file)
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -37,8 +37,6 @@
 
 #define CONFIG_RATTLER                 /* Analogue&Micro Rattler board */
 
-#undef DEBUG
-
 /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
 #define CONFIG_ENV_OVERWRITE
 
@@ -62,8 +60,8 @@
  * SCC, 1-3 for FCC)
  *
  * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
  */
 #undef CONFIG_ETHER_ON_SCC             /* Ethernet is not on SCC */
 #define CONFIG_ETHER_ON_FCC            /* Ethernet is on FCC     */
@@ -125,22 +123,33 @@
 
 #define CONFIG_BAUDRATE                38400
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL   \
-                               | CFG_CMD_DHCP    \
-                               | CFG_CMD_IMMAP   \
-                               | CFG_CMD_JFFS2   \
-                               | CFG_CMD_MII     \
-                               | CFG_CMD_PING    \
-                               )
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
 
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 #define CONFIG_BOOTCOMMAND     "bootm FE040000"        /* autoboot command */
 #define CONFIG_BOOTARGS                "root=/dev/mtdblock2 rw mtdparts=phys:1M(ROM)ro,-(root)"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef CONFIG_KGDB_ON_SMC              /* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC             /* define if kgdb on SCC */
 #undef CONFIG_KGDB_NONE                /* define if kgdb on something else */
@@ -158,7 +167,7 @@
 #define CFG_PROMPT_HUSH_PS2    "> "
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -178,13 +187,13 @@
 
 #define CFG_FLASH_BASE         0xFE000000
 #define CFG_FLASH_CFI
-#define CFG_FLASH_CFI_DRIVER
+#define CONFIG_FLASH_CFI_DRIVER
 #define CFG_MAX_FLASH_BANKS    1       /* max num of flash banks       */
 #define CFG_MAX_FLASH_SECT     256     /* max num of sects on one chip */
 
 #define        CFG_DIRECT_FLASH_TFTP
 
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
 #define CFG_JFFS2_NUM_BANKS    CFG_MAX_FLASH_BANKS
 #define CFG_JFFS2_SORT_FRAGMENTS
 
@@ -205,7 +214,7 @@
 #define MTDIDS_DEFAULT         "nor0=rattler-0"
 #define MTDPARTS_DEFAULT       "mtdparts=rattler-0:-@1m(jffs2)"
 */
-#endif /* CFG_CMD_JFFS2 */
+#endif /* CONFIG_CMD_JFFS2 */
 
 #define CFG_MONITOR_BASE       TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
@@ -214,12 +223,12 @@
 
 #define CFG_MONITOR_LEN                (256 << 10)     /* Reserve 256 kB for Monitor   */
 
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE      0x10000
-#define CFG_ENV_ADDR           (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE   0x10000
+#define CONFIG_ENV_ADDR                (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 #define CFG_DEFAULT_IMMR       0xFF010000
 
@@ -241,13 +250,13 @@
 /* Hard reset configuration word */
 #define CFG_HRCW_MASTER                0x0A06875A /* Not used - provided by FPGA */
 /* No slaves */
-#define CFG_HRCW_SLAVE1        0
-#define CFG_HRCW_SLAVE2        0
-#define CFG_HRCW_SLAVE3        0
-#define CFG_HRCW_SLAVE4        0
-#define CFG_HRCW_SLAVE5        0
-#define CFG_HRCW_SLAVE6        0
-#define CFG_HRCW_SLAVE7        0
+#define CFG_HRCW_SLAVE1                0
+#define CFG_HRCW_SLAVE2                0
+#define CFG_HRCW_SLAVE3                0
+#define CFG_HRCW_SLAVE4                0
+#define CFG_HRCW_SLAVE5                0
+#define CFG_HRCW_SLAVE6                0
+#define CFG_HRCW_SLAVE7                0
 
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM          0x02    /* Software reboot                  */
@@ -256,7 +265,7 @@
 #define CFG_BOOTMAPSZ          (8 << 20)       /* Initial Memory map for Linux */
 
 #define CFG_CACHELINE_SIZE     32      /* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
 #endif