rename CFG_ENV macros to CONFIG_ENV
[platform/kernel/u-boot.git] / include / configs / RPXlite_DW.h
index ff63259..6e72e96 100644 (file)
@@ -45,6 +45,7 @@
  */
 
 /* #define DEBUG       1 */
+/* #define DEPLOYMENT  1 */
 
 #undef CONFIG_MPC860
 #define CONFIG_MPC823          1       /* This is a MPC823e CPU. */
 #undef CONFIG_8xx_CONS_NONE
 #define CONFIG_BAUDRATE                9600    /* console default baudrate = 9600bps   */
 
-#ifdef CONFIG_LCD
-#define CONFIG_BOOTDELAY       12      /* autoboot after 12 seconds    */
-#else
+#ifdef DEBUG
 #define CONFIG_BOOTDELAY       -1      /* autoboot disabled            */
-#endif
+#else
+#define CONFIG_BOOTDELAY       6       /* autoboot after 6 seconds     */
+
+#ifdef DEPLOYMENT
+#define CONFIG_BOOT_RETRY_TIME         -1
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT         \
+       "autoboot in %d seconds (stop with 'st')...\n", bootdelay
+#define CONFIG_AUTOBOOT_STOP_STR       "st"
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_RESET_TO_RETRY          1
+#define CONFIG_BOOT_RETRY_MIN          1
+#endif /* DEPLOYMENT */
+#endif /* DEBUG */
+
+/* pre-boot commands */
+#define CONFIG_PREBOOT         "setenv stdout serial;setenv stdin serial"
 
 #undef CONFIG_BOOTARGS
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "netdev=eth0\0"                                                 \
-       "nfsargs=setenv bootargs console=ttyS0,9600 root=/dev/nfs rw "  \
-               "nfsroot=$(serverip):$(rootpath)\0"                     \
-       "ramargs=setenv bootargs console=tty0 console=ttyS0,9600 "      \
-               "root=/dev/ram rw\0"                                    \
-       "addip=setenv bootargs $(bootargs) "                            \
-               "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"      \
-               ":$(hostname):$(netdev):off panic=1\0"                  \
+       "nfsargs=setenv bootargs console=tty0 console=ttyS0,9600 "      \
+               "root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0"    \
+       "ramargs=setenv bootargs console=tty0 root=/dev/ram rw\0"       \
+       "addip=setenv bootargs ${bootargs} "                            \
+               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+               ":${hostname}:${netdev}:off panic=1\0"                  \
        "flash_nfs=run nfsargs addip;"                                  \
-               "bootm $(kernel_addr)\0"                                \
+               "bootm ${kernel_addr}\0"                                \
        "flash_self=run ramargs addip;"                                 \
-               "bootm $(kernel_addr) $(ramdisk_addr)\0"                \
-       "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"     \
+               "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
+       "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
        "gatewayip=172.16.115.254\0"                                    \
        "netmask=255.255.255.0\0"                                       \
-       "kernel_addr=ff880000\0"                                        \
-       "ramdisk_addr=ff980000\0"                                       \
-       ""
+       "kernel_addr=ff040000\0"                                        \
+       "ramdisk_addr=ff200000\0"                                       \
+       "ku=era ${kernel_addr} ff1fffff;cp.b 100000 ${kernel_addr} "    \
+               "${filesize};md ${kernel_addr};"                        \
+               "echo kernel updating finished\0"                       \
+       "uu=protect off 1:0-4;era 1:0-4;cp.b 100000 ff000000 "          \
+               "${filesize};md ff000000;"                              \
+               "echo u-boot updating finished\0"                       \
+       "eu=protect off 1:6;era 1:6;reset\0"                            \
+       "lcd=setenv stdout lcd;setenv stdin lcd\0"                      \
+       "ser=setenv stdout serial;setenv stdin serial\0"                \
+       "verify=no"
+
 #define CONFIG_BOOTCOMMAND     "run flash_self"
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 #undef CONFIG_STATUS_LED               /* disturbs display. Status LED disabled. */
 
-#define CONFIG_BOOTP_MASK      (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+#if 1         /* Enable this stuff could make image enlarge about 25KB. Mask it if you
+                 don't want the advanced function */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_DHCP
+
+#ifdef CONFIG_SPLASH_SCREEN
+#define CONFIG_CMD_BMP
+#endif
+
+
+/* test-only */
+#define CFG_JFFS2_FIRST_BANK   0           /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS    1           /* ! second bank contains U-Boot */
+
+#define CONFIG_NETCONSOLE
+
+#endif /* 1 */
 
 /*
  * Miscellaneous configurable options
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "u-boot>"       /* Monitor Command Prompt   */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
 #endif
+
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define CFG_MAXARGS    16              /* max number of command args   */
 #define CFG_BARGSIZE   CFG_CBSIZE      /* Boot Argument Buffer Size    */
 #define CFG_SDRAM_BASE         0x00000000
 #define CFG_FLASH_BASE         0xFF000000
 
-#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
 #define CFG_MONITOR_LEN                (256 << 10)     /* Reserve 256 kB for Monitor   */
 #else
 #define CFG_MONITOR_LEN                (128 << 10)     /* Reserve 128 kB for Monitor */
 #endif
+
 #define CFG_MONITOR_BASE       0xFF000000
 #define CFG_MALLOC_LEN         (128 << 10)     /* Reserve 128 kB for malloc()  */
 
 #define CFG_FLASH_ERASE_TOUT   120000  /* Timeout for Flash Erase (in ms)      */
 #define CFG_FLASH_WRITE_TOUT   500     /* Timeout for Flash Write (in ms)      */
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_ADDR           0xFA000100
-#define CFG_ENV_SIZE           0x1000
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_ADDR                0xFA000100
+#define CONFIG_ENV_SIZE                0x1000
 #else
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET         0x30000 /* Offset of Environment Sector         */
-#define CFG_ENV_SIZE           0x8000  /* Total Size of Environment Sector     */
-#endif
-
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET              0x30000 /* Offset of Environment Sector         */
+#define CONFIG_ENV_SIZE                0x8000  /* Total Size of Environment Sector     */
+#endif /* CONFIG_ENV_IS_IN_NVRAM */
 
+#define CFG_RESET_ADDRESS      ((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     16      /* For all MPC8xx CPUs                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    4       /* log base 2 of the above value        */
 #endif
 
  * power management and some other internal clocks
  */
 #define SCCR_MASK      SCCR_EBDF00
-/* Up to 64MHz system clock, we use 1:2 SYSTEM/BUS ratio */
+/* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */
+#if defined(RPXlite_64MHz)
 #define CFG_SCCR       ( SCCR_TBS | SCCR_EBDF01 )  /* %%%SCCR:0x02020000 */
+#else
+#define CFG_SCCR       ( SCCR_TBS | SCCR_EBDF00 )  /* %%%SCCR:0x02000000 */
+#endif
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
 #define CONFIG_SERVERIP 172.16.115.6
 #define CONFIG_ROOTPATH /workspace/myfilesystem/target/
 #define CONFIG_BOOTFILE uImage.rpxusb
+#define CONFIG_HOSTNAME LITE_H1_DW
 
 #endif /* __CONFIG_H */