config: remove platform CONFIG_SYS_HZ definition part 1/2

[platform/kernel/u-boot.git] / include / configs / RPXClassic.h

diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index 162ef09..0f07d0c 100644 (file)
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2000, 2001, 2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -42,6 +26,8 @@
 #define CONFIG_MPC860           1
 #define CONFIG_RPXCLASSIC              1
 
+#define        CONFIG_SYS_TEXT_BASE    0xff000000
+
 #define        CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
 #undef CONFIG_8xx_CONS_SMC2
 #undef CONFIG_8xx_CONS_NONE
@@ -53,6 +39,7 @@
 #define CONFIG_SYS_DISCOVER_PHY        1
 #define CONFIG_MII              1
 #endif /* CONFIG_FEC_ENET */
+#define CONFIG_MISC_INIT_R
 
 /* Video console (graphic: Epson SED13806 on ECCX board, no keyboard         */
 #if 1
@@ -114,7 +101,6 @@
  */
 #define CONFIG_SYS_RESET_ADDRESS       0x80000000
 #define        CONFIG_SYS_LONGHELP                     /* undef to save memory         */
-#define        CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
 #define        CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
 #else
@@ -129,10 +115,6 @@
 
 #define        CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 
-#define        CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -147,14 +129,16 @@
  * I2C Configuration
  *-----------------------------------------------------------------------------
  */
-#define CONFIG_I2C              1
-#define CONFIG_SYS_I2C_SPEED           50000
-#define CONFIG_SYS_I2C_SLAVE           0x34
+#define CONFIG_SYS_I2C_SPEED           50000
+#define CONFIG_SYS_I2C_SLAVE           0x34
 
 
 /* enable I2C and select the hardware/software driver */
 #define CONFIG_HARD_I2C                1       /* I2C with hardware support    */
-#undef  CONFIG_SOFT_I2C                        /* I2C bit-banged               */
+#undef  CONFIG_SYS_I2C_SOFT            /* I2C bit-banged               */
+
+#if defined(CONFIG_SYS_I2C_SOFT)
+#define CONFIG_SYS_I2C                 1
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -169,8 +153,10 @@
 #define I2C_DELAY      udelay(5)       /* 1/4 I2C clock duration */
 
 
-# define CONFIG_SYS_I2C_SPEED          50000
-# define CONFIG_SYS_I2C_SLAVE          0x34
+#define CONFIG_SYS_I2C_SOFT_SPEED      50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0x34
+#endif
+
 # define CONFIG_SYS_I2C_EEPROM_ADDR    0x50    /* EEPROM X24C16                */
 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1      /* bytes of address             */
 /* mask of address bits that overflow into the "EEPROM chip address"    */
@@ -180,9 +166,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define        CONFIG_SYS_INIT_RAM_END 0x3000  /* End of used area in DPRAM    */
-#define        CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define        CONFIG_SYS_INIT_RAM_SIZE        0x3000  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define        CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -314,6 +299,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT     1       /* Use preinit IDE hook */
 #define        CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 
 #undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
@@ -441,15 +427,6 @@
                         MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |   \
                         MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 /* Configuration variable added by yooth. */
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */