ppc4xx: Use common NS16550 driver for PPC4xx UART

[platform/kernel/u-boot.git] / include / configs / PMC440.h

diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index d6e2f6b..fd2e9a9 100644 (file)
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -53,7 +53,7 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN         (384  * 1024)   /* Reserve 384 kB for Monitor   */
+#define CONFIG_SYS_MONITOR_LEN         (~(TEXT_BASE) + 1)
 #define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)   /* Reserve 256 kB for malloc()  */
 
 #define CONFIG_PRAM            0       /* use pram variable to overwrite */
@@ -61,7 +61,7 @@
 #define CONFIG_SYS_BOOT_BASE_ADDR      0xf0000000
 #define CONFIG_SYS_SDRAM_BASE          0x00000000      /* _must_ be 0          */
 #define CONFIG_SYS_FLASH_BASE          0xfc000000      /* start of FLASH       */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE                TEXT_BASE
 #define CONFIG_SYS_NAND_ADDR           0xd0000000      /* NAND Flash           */
 #define CONFIG_SYS_OCM_BASE            0xe0010000      /* ocm                  */
 #define CONFIG_SYS_OCM_DATA_ADDR       CONFIG_SYS_OCM_BASE
@@ -72,9 +72,6 @@
 #define CONFIG_SYS_PCI_MEMBASE3        CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
 #define CONFIG_SYS_PCI_MEMSIZE         0x80000000      /* 2GB! */
 
-/* Don't change either of these */
-#define CONFIG_SYS_PERIPHERAL_BASE     0xef600000      /* internal peripherals */
-
 #define CONFIG_SYS_USB2D0_BASE         0xe0000100
 #define CONFIG_SYS_USB_DEVICE          0xe0000000
 #define CONFIG_SYS_USB_HOST            0xe0000400
@@ -95,10 +92,14 @@
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SERIAL_MULTI    1
-#undef CONFIG_UART1_CONSOLE    /* console on front panel */
+#define CONFIG_SERIAL_MULTI     1
 
 #define CONFIG_SYS_BAUDRATE_TABLE                                              \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -226,6 +227,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C                1       /* I2C with hardware support    */
 #undef CONFIG_SOFT_I2C         /* I2C bit-banged               */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
 #define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE           0x7F
 
@@ -287,12 +289,8 @@
        "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
        "addmisc=setenv bootargs ${bootargs} mem=${mem}\0"              \
        "nandargs=setenv bootargs root=/dev/mtdblock6 rootfstype=jffs2 rw\0" \
-       "nand_boot=run nandargs addip addtty addmisc;bootm ${kernel_addr}\0" \
        "nand_boot_fdt=run nandargs addip addtty addmisc;"              \
                "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
-       "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
-               "run nfsargs addip addtty addmisc;"                     \
-               "bootm\0"                                               \
        "net_nfs_fdt=tftp ${kernel_addr_r} ${bootfile};"                \
                "tftp  ${fdt_addr_r} ${fdt_file};"                      \
                "run nfsargs addip addtty addmisc;"                     \
@@ -304,8 +302,8 @@
        "fdt_addr_r=800000\0"                                           \
        "fpga=fpga loadb 0 ${fpga_addr}\0"                              \
        "load=tftp 200000 /tftpboot/pmc440/u-boot.bin\0"                \
-       "update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;"   \
-               "cp.b 200000 fffa0000 60000\0"                          \
+       "update=protect off fff90000 ffffffff;era fff90000 ffffffff;"   \
+               "cp.b 200000 fff90000 70000\0"                          \
        ""
 
 #define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds     */
@@ -351,15 +349,12 @@
 
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DTT
-#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_I2C
-#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NET
@@ -368,7 +363,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SDRAM
 
 /* POST support */
 #define CONFIG_POST            (CONFIG_SYS_POST_MEMORY |       \
@@ -435,11 +429,14 @@
 /* Board-specific PCI */
 #define CONFIG_SYS_PCI_TARGET_INIT
 #define CONFIG_SYS_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ
 
 /* PCI identification */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
 #define CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH 0x0441     /* PCI Device ID: Non-Monarch */
 #define CONFIG_SYS_PCI_SUBSYS_ID_MONARCH 0x0440        /* PCI Device ID: Monarch */
+/* for weak __pci_target_init() */
+#define CONFIG_SYS_PCI_SUBSYS_ID       CONFIG_SYS_PCI_SUBSYS_ID_MONARCH
 #define CONFIG_SYS_PCI_CLASSCODE_NONMONARCH    PCI_CLASS_PROCESSOR_POWERPC
 #define CONFIG_SYS_PCI_CLASSCODE_MONARCH       PCI_CLASS_BRIDGE_HOST