i2c: Move PPC4xx I2C driver into drivers/i2c directory

[platform/kernel/u-boot.git] / include / configs / PMC440.h

diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index fc48bc1..c2fb56c 100644 (file)
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -215,7 +215,6 @@
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MBYTES_SDRAM        (256)   /* 256MB                        */
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CONFIG_DDR_DATA_EYE    /* use DDR2 optimization        */
 #endif
@@ -227,10 +226,10 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C                1       /* I2C with hardware support    */
 #undef CONFIG_SOFT_I2C         /* I2C bit-banged               */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
 #define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE           0x7F
 
-#define CONFIG_I2C_CMD_TREE    1
 #define CONFIG_I2C_MULTI_BUS   1
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
@@ -289,12 +288,8 @@
        "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
        "addmisc=setenv bootargs ${bootargs} mem=${mem}\0"              \
        "nandargs=setenv bootargs root=/dev/mtdblock6 rootfstype=jffs2 rw\0" \
-       "nand_boot=run nandargs addip addtty addmisc;bootm ${kernel_addr}\0" \
        "nand_boot_fdt=run nandargs addip addtty addmisc;"              \
                "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
-       "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
-               "run nfsargs addip addtty addmisc;"                     \
-               "bootm\0"                                               \
        "net_nfs_fdt=tftp ${kernel_addr_r} ${bootfile};"                \
                "tftp  ${fdt_addr_r} ${fdt_file};"                      \
                "run nfsargs addip addtty addmisc;"                     \
@@ -353,15 +348,12 @@
 
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DTT
-#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_I2C
-#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NET
@@ -370,7 +362,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SDRAM
 
 /* POST support */
 #define CONFIG_POST            (CONFIG_SYS_POST_MEMORY |       \
@@ -437,11 +428,14 @@
 /* Board-specific PCI */
 #define CONFIG_SYS_PCI_TARGET_INIT
 #define CONFIG_SYS_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ
 
 /* PCI identification */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
 #define CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH 0x0441     /* PCI Device ID: Non-Monarch */
 #define CONFIG_SYS_PCI_SUBSYS_ID_MONARCH 0x0440        /* PCI Device ID: Monarch */
+/* for weak __pci_target_init() */
+#define CONFIG_SYS_PCI_SUBSYS_ID       CONFIG_SYS_PCI_SUBSYS_ID_MONARCH
 #define CONFIG_SYS_PCI_CLASSCODE_NONMONARCH    PCI_CLASS_PROCESSOR_POWERPC
 #define CONFIG_SYS_PCI_CLASSCODE_MONARCH       PCI_CLASS_BRIDGE_HOST