tizen 2.3.1 release

[platform/kernel/u-boot.git] / include / configs / PMC440.h

diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index fd39109..4eb0735 100644 (file)
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -10,7 +10,20 @@
  * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
  * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
  *
- * SPDX-License-Identifier:    GPL-2.0+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
  */
 
 /************************************************************************
@@ -24,6 +37,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_440EPX          1       /* Specific PPC440EPx   */
 #define CONFIG_440             1       /* ... PPC440 family    */
+#define CONFIG_4xx             1       /* ... PPC4xx family    */
 
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xFFF90000
@@ -88,6 +102,7 @@
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE                115200
+#define CONFIG_SERIAL_MULTI     1
 
 #define CONFIG_SYS_BAUDRATE_TABLE                                              \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -185,7 +200,9 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE        256
 #define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_SYS_NAND_ECCSTEPS       (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
 #define CONFIG_SYS_NAND_OOBSIZE        16
+#define CONFIG_SYS_NAND_ECCTOTAL       (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
 #define CONFIG_SYS_NAND_ECCPOS         {0, 1, 2, 3, 6, 7}
 #endif
 
@@ -211,14 +228,13 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_PPC4XX
-#define CONFIG_SYS_I2C_PPC4XX_CH0
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          400000
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F
-#define CONFIG_SYS_I2C_PPC4XX_CH1
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_1          400000
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1          0x7F
+#define CONFIG_HARD_I2C                1       /* I2C with hardware support    */
+#undef CONFIG_SOFT_I2C         /* I2C bit-banged               */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
+#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address  */
+#define CONFIG_SYS_I2C_SLAVE           0x7F
+
+#define CONFIG_I2C_MULTI_BUS   1
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 
@@ -308,6 +324,7 @@
 #define CONFIG_HAS_ETH0
 #define CONFIG_SYS_RX_ETH_BUFFER       32      /* Number of ethernet rx buffers & descriptors */
 
+#define CONFIG_NET_MULTI       1
 #define CONFIG_HAS_ETH1                1       /* add support for "eth1addr"   */
 #define CONFIG_PHY1_ADDR       1
 #define CONFIG_RESET_PHY_R     1
@@ -371,6 +388,7 @@
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
+#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size      */
 #else
@@ -386,6 +404,8 @@
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address      */
 #define CONFIG_SYS_EXTBDINFO           1       /* To use extended board_into (bd_t) */
 
+#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
+
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_LOOPW           1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC       1       /* enable mdc/mwc commands      */
@@ -403,7 +423,6 @@
  *----------------------------------------------------------------------*/
 /* General PCI */
 #define CONFIG_PCI             /* include pci support          */
-#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_PNP         /* do (not) pci plug-and-play   */
 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0       /* to avoid problems with PNP   */
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup  */
@@ -414,8 +433,6 @@
 #define CONFIG_SYS_PCI_MASTER_INIT
 #define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ
 
-#define CONFIG_PCI_BOOTDELAY 0
-
 /* PCI identification */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
 #define CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH 0x0441     /* PCI Device ID: Non-Monarch */
@@ -491,6 +508,7 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /* pass open firmware flat tree */