Re-factoring the legacy NAND code (legacy NAND now only in board-specific

[platform/kernel/u-boot.git] / include / configs / PIP405.h

diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index d9f8be8..091b768 100644 (file)
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -50,11 +50,13 @@
                        CFG_CMD_PCI     | \
                        CFG_CMD_CACHE   | \
                        CFG_CMD_IRQ     | \
+                       CFG_CMD_ECHO    | \
                        CFG_CMD_EEPROM  | \
                        CFG_CMD_I2C     | \
                        CFG_CMD_REGINFO | \
                        CFG_CMD_FDC     | \
                        CFG_CMD_SCSI    | \
+                       CFG_CMD_FAT     | \
                        CFG_CMD_DATE    | \
                        CFG_CMD_ELF     | \
                        CFG_CMD_USB     | \
@@ -67,6 +69,8 @@
 /* this must be included AFTER the definition of CONFIG_COMMANDS  (if any) */
 #include <cmd_confdefs.h>
 
+#define CFG_NAND_LEGACY
+
 #define         CFG_HUSH_PARSER
 #define         CFG_PROMPT_HUSH_PS2 "> "
 /**************************************************************
@@ -101,7 +105,7 @@
  ***************************************************************/
 #define SPD_EEPROM_ADDRESS      0x50
 
-#define CONFIG_BOARD_PRE_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
 /**************************************************************
  * Environment definitions
  **************************************************************/
@@ -110,7 +114,7 @@
 
 #define CONFIG_BOOTDELAY       5
 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
-#define CONFIG_BOOT_RETRY_TIME -10     /* feature is avaiable but not enabled */
+/* #define CONFIG_BOOT_RETRY_TIME      -10     /XXX* feature is available but not enabled */
 #define CONFIG_ZERO_BOOTDELAY_CHECK    /* check console even if bootdelay = 0 */
 
 
@@ -141,7 +145,7 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change        */
 
-
+#define CONFIG_MISC_INIT_R
 /***********************************************************
  * Miscellaneous configurable options
  **********************************************************/
@@ -202,7 +206,7 @@
 #define CFG_FLASH_BASE         0xFFF80000
 #define CFG_MONITOR_BASE       CFG_FLASH_BASE
 #define CFG_MONITOR_LEN                (512 * 1024)    /* Reserve 512 kB for Monitor   */
-#define CFG_MALLOC_LEN         (128 * 1024)    /* Reserve 128 kB for malloc()  */
+#define CFG_MALLOC_LEN         (1024 * 1024)   /* Reserve 1024 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
@@ -222,7 +226,7 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE                8192    /* For IBM 405 CPUs                     */
+#define CFG_DCACHE_SIZE                8192    /* For AMCC 405 CPUs                    */
 #define CFG_CACHELINE_SIZE     32      /* ...                  */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
@@ -231,9 +235,12 @@
 /*
  * Init Memory Controller:
  */
+#define FLASH_MAX_SIZE         0x00800000              /* 8MByte max */
+#define FLASH_BASE_PRELIM      0xFF800000  /* open the flash CS */
+/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
+#define FLASH_SIZE_PRELIM       3  /* maximal flash FLASH size bank #0 */
 
-#define FLASH_BASE0_PRELIM     0xFFC00000      /* FLASH bank #0        */
-#define FLASH_BASE1_PRELIM     0               /* FLASH bank #1        */
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /* Configuration Port location */
 #define CONFIG_PORT_ADDR       0xF4000000
@@ -299,6 +306,7 @@
 #undef CONFIG_IDE_LED                  /* no led for ide supported     */
 #define CONFIG_IDE_RESET               /* reset for ide supported...   */
 #define CONFIG_IDE_RESET_ROUTINE       /* with a special reset function */
+#define CONFIG_SUPPORT_VFAT
 
 /************************************************************
  * ATAPI support (experimental)
@@ -365,6 +373,11 @@
 #endif
 
 /************************************************************
+ * support BZIP2 compression
+ ************************************************************/
+#define CONFIG_BZIP2           1
+
+/************************************************************
  * Ident
  ************************************************************/
 #define VERSION_TAG "released"