Remove remnants of obsolete CONFIG_SYS_GBL_DATA_SIZE comments

[platform/kernel/u-boot.git] / include / configs / PCIPPC2.h

diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h
index 5951d00..b2b94b4 100644 (file)
--- a/include/configs/PCIPPC2.h
+++ b/include/configs/PCIPPC2.h
@@ -43,6 +43,8 @@
 
 #define CONFIG_PCIPPC2         1       /* this is a PCIPPC2 board      */
 
+#define        CONFIG_SYS_TEXT_BASE    0xfff00000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1
 #define CONFIG_MISC_INIT_R     1
 
@@ -75,7 +77,6 @@
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
@@ -84,8 +85,6 @@
 #define CONFIG_PCI             1
 #define CONFIG_PCI_PNP         1       /* PCI plug-and-play */
 
-#define CONFIG_NAND_LEGACY
-
 /*
  * Miscellaneous configurable options
  */
@@ -120,7 +119,7 @@
 
 #define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_MONITOR_LEN     (256 << 10) /* Reserve 256 kB for Monitor   */
 #define CONFIG_SYS_MALLOC_LEN      (128 << 10) /* Reserve 128 kB for malloc()  */
@@ -139,13 +138,9 @@
  * Definitions for initial stack pointer and data area
  */
 
-/* Size in bytes reserved for initial data
- */
-#define CONFIG_SYS_GBL_DATA_SIZE    128
-
 #define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_END      0x8000
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE      0x8000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_INIT_RAM_LOCK
@@ -197,9 +192,8 @@
  * For the detail description refer to the PCIPPC2 user's manual.
  */
 #define CONFIG_SYS_HZ                1000
-#define CONFIG_SYS_BUS_HZ            100000000 /* bus speed - 100 mhz          */
+#define CONFIG_SYS_BUS_CLK            100000000 /* bus speed - 100 mhz          */
 #define CONFIG_SYS_CPU_CLK           300000000
-#define CONFIG_SYS_BUS_CLK           100000000
 
 /*
  * For booting Linux, the board info and command line data
@@ -242,23 +236,6 @@
                   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 #define L2_ENABLE (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
-/*-----------------------------------------------------------------------
- * Disk-On-Chip configuration
- */
-
-#define CONFIG_SYS_MAX_DOC_DEVICE      1       /* Max number of DOC devices            */
-
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-
 /*-----------------------------------------------------------------------
   RTC m48t59
 */